R&S EMC测试软件EMC32

  • EMC 测量软件EMC32

    用于开发、一致性和批量测试


    EMC32,用于控制EMI测试接收机,进行电磁干扰的全自动测试并生成专业的测试报告。测试项目包括骚扰电压(电源端子、电信端口传导共模、控制端子、负载端子、天线端子等)、骚扰电流、骚扰功率、辐射骚扰(磁场,电场)、杂散辐射(传导和辐射)等。

    EMC32通过可视化的图表数据以及友好的用户界面将繁复耗时的EMI测试转变为轻松可控的简单窗口程序的操作。

    EMC32提供了组织管理EMI测试环境、测试人员、测试设备、测试数据以及完整测试所涉及到的各个环节(包括配置、预扫、精调和终测等等)的方便且高效的途径。

    img1EMC32软件支持用户创建、定制等多种自定义测试限值的管理功能,为用户的使用提供了足够充分的灵活性和可扩展性。

    EMC32支持的可定制的报表预览模式也极大程度上简化了EMI测试报表的生成。

    EMC32可满足各类标准传导和辐射EMI的自动测量,也可自定义测试。

    可以按照不同测试标准要求,设定相应的测试模板;

    可将多次的测试结果,放置在同一张图表中;

    报告输出格式支持RTF、PDF,也可以自行编辑报告;

    能通过LAN、USB、RS232、GPIB等通信接口远程控制仪器。


    权威性

    全球50%以上的认证实验室在使用EMC32软件,用于EMI测试

    灵活性

    测量电磁干扰(EMI)和电磁敏感度(EMS)的模块

    支持民用标准的测量,如CISPR, IEC, ISO,EN, ETSI, VDE,FCC 和ANSI

    支持军用标准的测量,如MIL-STD-461F,GJB 151A,GJB 151B

    支持汽车电子标准的测量,CISPR 25,ISO 11452-2/3/4/5

    支持全自动的辐射骚扰、功率骚扰和传导骚扰测试

    可完成全自动测试、自动、手动结合的测试,也可以进行手动测试

    软件能够控制系统硬件完成相应试验的自动校准和测试;可以自动进行传感器,射频电缆与信号线路校准;具备RF信号通道、预放、衰减器、滤波器等的校准功能

    高效性

    仪器和系统配置的图形用户界面

    所有测试程序中均具有菜单引导,直观的用户提示(虚拟仪器)

    面向生产的测试选择

    EUT- 专用数据管理

    模块化校准概念

    只需最小的重新校准工作

    简化测试系统认证

    辅助安装和配置

    在线帮助

    面向未来的设计

    模块化编程结构

    可简易升级

    文本格式的数据存储

    报告输出格式支持RTF、HTML、PDF,也可以自行编辑报告

    Windows软件

    可以按照设定的数值,自动选取可疑点,也可以手动选取可疑点

    可以按照设定的标准值,自动判断测试结果

    可以实时显示转台、天线塔的位置信息,并自动记录在测试结果中

    img2转台、天线塔的移动顺序可调整,也可实现连续旋转测试

    软件可以直接输出测试结果至工程师设定的报告模板之中,工程师可自定义设置该模板

    报告版面设计可以存储为模版的形式

    可以设定密码保护,控制非授权更改软件,确保系统一致性;

    测量结束后可自由更换标准限值功能;

    三步测量:预扫频,捕捉可疑频点和最终测量;

    在最终测量之前,可微调频率选择窄带宽,然后再次找出最糟点时的频率点。

    能通过LAN, USB, RS232, GPIB远程控制仪器

    软件具有测量结束后可更换标准限值功能, 并能重新绘图


    EMC32 测试部分软件模块:

    EMC32-EB:EMI测量软件基本版本,用于民品、汽车电子和军品标准,带有硬件保护狗

    EMC32-K10:EMC32选配件:EMI自动测试模块

    EMC32-MEB:EMC32-EB的多用户版本

    EMC32-MK10:EMC32-K10的多用户版本


    EMC32-S:EMS测试软件选件

    另外还有适用于多种行业的EMC32的ikey可选用,包括汽车电子EMC测试,杂散测试,无线测试等。


     EMC32其他选件:

    R&S®EMC32-S EMS measurement software, version 9

    R&S®EMC32-EB basic version for commercial and military standards; hardlock protection

    R&S®EMC32-MEBMultiuser license for R&S®EMC32-EB EMI measurement software hardlock protection; standard license required

    .

     

    Options

    R&S®EMC32-K1 Enhanced EMS level functions for EMS measurements in accordance with automotive standards and MIL-STD 461E

    Integrated CAN-BUS monitoring supporting CANoe by Vector Informatik

     

    R&S®EMC32-K2EMC measurement functionalities "audio breakthrough" and "spurious emissions" in accordance with the corresponding wireless standards

     

    R&S®EMC32-K3R&S®EMC32-S option for EMS measurements in Mode Tuned Chambers "Reverberation Chamber"

    requires R&S®EMC32-K4 option

     

    R&S®EMC32-K4 R&S®EMC32-S option for automatic EMS Test sequences

     

    R&S®EMC32-K6 R&S®EMC32-S option for MIL-STD.461E; CS103, 104, 105 

     

    R&S®EMC32-K7R&S®EMC32-S option: Generic driver for generators, power meters and oscilloscopes 

     

    R&S®EMC32-K8 Database Interface

     

    R&S®EMC32-K10

    EMI Auto Test

    Fully automatic disturbance measurements To run the R&S®EMC32-K10 software option, the R&S®EMC32-EB basic package for EMI measurements is required.

     

    R&S®EMC32-K10A

    EMI Autotest extension for spuious measurments

    The R&S®EMC32-K10A option extends the functionalities of the EMI autotest option EMC32-K10 to perform the spurious measurements in accordance with the standards EN 300328, EN 301 893 and EN 302 502

     

    R&S®EMC32-K11

    EMC Test Sequencer

    Smart linking of EMC test sequences

    To run the R&S®EMC32-K11 software option, the R&S®EMC32-EB basic package for EMI measurements and/or the R&S®EMC32-S basic package for EMS measurements is required.

     

    R&S®EMC32-K21

    Application Interface

    Automation of additional measurement tasks

    To run the R&S®EMC32-K21 software option, the R&S®EMC32-EB basic package for EMI measurements and/or the R&S®EMC32-S basic package for EMS measurements is required.

     

    R&S®EMC32-K22

    Azimuth Chart

    Measurement of RF radiation patterns of EUTs

    To run the R&S®EMC32-K22 software option, the R&S®EMC32-EB basic package for EMI measurements is required. For measurements on mobile phones, the R&S®EMC32-K2 software option is also required

     

    R&S®EMC32-K23

    3D evaluation for EMI autotest

    The R&S®EMC32 application software module R&S®EMC32-K23 extends the functionalities of the emission basic software R&S®EMC32-K10 with the possibility to display a 3D chart of the measurement results at a certain critical frequency.

     

    R&S®EMC32-K24

    Interactive measurement for EMI autotest

    The R&S®EMC32 application software module R&S®EMC32-K24 extends the functionalities of the emission basic software R&S®EMC32-K10 with the possibility to proceed interactive single measurements.

     

    R&S®EMC32-K251

    RSE and ABT measurements on TD-SCDMA devices

    The R&S®EMC32-K251 option extends the functionalities of the wireless basic option EMC32-K2 to cover the TD-SCDMA technology both for Radiated Spurious Emission as well as for Audio Break Through measurements using R&S®CMW500 - Production Test

     

    R&S®EMC32-K26

    LTE Extension for R&S®EMC32-K2

    The R&S®EMC32 application software module R&S®EMC32-K26 extends the functionalities of the wireless basic application software R&S®EMC32-K2 to cover now the LTE technology. R&S®EMC32-K26 provides remote controlled measurements using the latest R&S base station emulator R&S®CMW500 - Production Test and the signal condition unit R&S®OSP-B155 which are the core instruments of the RSE / EMI test system R&S®TS8996 as well as the EMS System R&S®TS9982.

     

    R&S®EMC32-K27

    Dual Receiver Measurement (DRM)

    To run the R&S®EMC32-K27 option, the R&S®EMC32-EB and R&S®EMC32-K10 options are required.

     

    R&S®EMC32-K33

    EMC32-EB option for EMI measurements in Mode Tuned Chambers "Reverberation Chambers"

    Requires EMC32-K3 and EMC32-K10 options

     

    R&S®EMC32-K35

    EMS Measurements on Multimedia Receivers 

     

    R&S®EMC32-K48

    Shielding Effectiveness Test

    The R&S®EMC32-K48 option extends the functionalities of the EMS basic module EMC32-S to perform shielding effectiveness measurements in accordance with international standards

     

    R&S®EMC32-K51

    Automotive Band Evaluation

    R&S®EMC32-EB option for measurement reports of EMI band measurements data in accordance with automotive standards.

     

    R&S®EMC32-K56

    EMI measurements acc. MIL-STD 

     

    R&S®EMC32-K84

    Interface to word processing apps

    The R&S®EMC32-K84 option allows the easy generation of test reports in Microsft Word using customer specific templates.



    • 厂家
      ROHDE&SCHWARZ
    • 国家
      德国
    • 测试分类
      CE-传导发射;RE-辐射发射;CS-传导抗扰度;RS-辐射抗扰度
最后修改:2018-11-27 18:12
收藏(需登陆)
0

相关产品:

首页    按EMC品牌查询    Rohde-Schwarz 罗德与施瓦茨    R&S EMC测试软件EMC32
EMC32,用于控制EMI测试接收机,进行电磁干扰的全自动测试并生成专业的测试报告。测试项目包括骚扰电压(电源端子、电信端口传导共模、控制端子、负载端子、天线端子等)、骚扰电流、骚扰功率、辐射骚扰(磁场,电场)、杂散辐射(传导和辐射)等。也可以进行EMS抗扰度测试,包括CS和RS系统。
选购(需登陆)
  • 回到顶部
  • 13480648187
  • QQ客服
  • 微信服务号

产品导航