- Shenzhen EUTTEST Technology Co.,Ltd.
- Electromagnetic test equipment
- EUT TEST
This catalog will show the Division I wrote the EMC electromagnetic compatibility related test standards specified test methods and standard analysis, our information only introduces the more focused standard introduction and test equipment equipment related issues, such as learning the standard, please check the original standard directly, the Division I wrote the article is for reference only, for the analysis of the standard we put forward the viewpoints and standards are inconsistent with the content of the standard, please contact yourselves! Standard publisher for more information.
This paper details the definitions and test methods for discontinuous disturbance and click, which is a type of discontinuous disturbance, and explains what counts as click, and what equipment does not need to be tested for click. Finally, a test method for click is given.
According to CISPR14.1 and GB4343.1 standards proposed by the test method, regardless of the power supply mode is AC or DC (or battery), all household appliances or similar equipment should be tested for electromagnetic compatibility, the following to see what products in life are required to test the electrical ...
This article is written by EUTTEST RF field induction conducted immunity test method analysis and description, corresponding to the IEC61000-4-6 and GBT17262.6 standard test method, EUTTEST is also a EMC test system provider, we...
The current clamp test method is proposed by the international standard IEC61000-4-6 as well as GB/T 17262.6, one of the test methods in the conducted immunity test system, the purpose of this method is to test the current injection clamp will be coupled to the interconnecting cable of the EUT of the high-frequency signals, but also can...
The EM Clamp test method is one of the test methods in the conducted immunity test system proposed by the international standard IEC61000-4-6 and GB/T 17262.6, which aims to utilize the EM Clamp to couple high frequency signals to the interconnecting cables of the EUTs, and then...
The CDN test method is one of the test methods in the conducted immunity test system proposed by the international standard IEC61000-4-6 and GB/T 17262.6, which aims to utilize high frequency RF signals injected into the power line of the EUT under test, and then observe...
CS114 is one of the test items of GJB151B-2013, this article mainly introduces CS114 test methods and test equipment and other requirements, the required test equipment our company have agents to sell, details click the text link below to view the specific test instruments.
CE102 is GJB151B-2013 and MIL-STD-461F standards are required by more than 10kHz power line conducted emission test program, CE102 and CE101 the biggest difference is that the test frequency range is different. This article mainly introduces the military EMC standard requirements...