EMC test

This paper introduces the HT9460 and HT9464 models of high-voltage isolation test systems manufactured by HT-world Inc. in the U.S. and lists the differences between the HT9460 and HT9464, the HT9...

Marked 2024: both the YRS01 and YRS02 have been discontinued, the replacement is the YRS04, both the YRS01 and YRS02 are manufactured by York and produce 9kHz-1GHz...

The electric and magnetic field conversion formula using the free-space wave impedance of 377Ω applies only to far-field plane waves (EMC radiated nuisance, antenna far-field), and is not available for the near-field (coils, IF magnetic fields, near-field probes, near areas of shielded chambers). 377Ω ...

This paper focuses on the SAE automotive electronics EMC test standards that will be in effect in 2026, compiles and integrates the list of core standards, clarifies the standard number, standard name, effective date and corresponding ISO standards, and briefly summarizes each standard...

CS101 is a test item of military EMC standard, which is mainly used to verify the immunity tolerance of EUT to carry coupled RF voltage signals to the input power line. This article provides CS101 limit lines, calibration methods, EUT...

China in 2025 issued GB/T 44937 sequence and GB/T 42968 sequence IC EMC integrated circuit EMC national standards list, covering EMI and EMS two parts of the standard content, in addition...

RF attenuator is RF engineers for RF testing such as EMC electromagnetic compatibility testing of the most common test instruments, can prevent EMI receiver overload or large signal input damage to the pre-filter, learn the basics of RF attenuator can help you ...

RF connector basics including from 1939 to the present development history, basic use, basic structure, test standards and other content to start, in addition according to the use of frequency or application of different ways there are a lot of different shapes and connections and types of joints...