2024 Update: Both YRS01 and YRS02 have been discontinued, check out the latest products!YRS04The
What are YRS01 and YRS02?
YRS01 respond in singing YRS02 Both models are white noise or comb-spectrum output noise signal sources manufactured by York in the UK and authorized for sale by EUTTEST in Shenzhen.
York YRS01
The YRS01 and YRS02 are multi-purpose reference sources that produce continuous noise signals from 9kHz-1GHz and comb signals with selectable spectral spacing from 5kHz-1GHz. The YRS consists of two models, the YRS01 and the YRS02 , the YRS01 is compatible with the BP01 battery pack and can also be powered by an external USB power supply. the YRS01 can be used as an accessory to the CGE kit by sharing the power supply with the CGE Comb Signal Generator. The YRS02 is a standalone multi-purpose reference source with built-in battery.
York YRS02
YRS01 and YRS02 have the same scope of use.
- Comparison of different measurement environments, e.g. OATS or darkroom
- Validation of radiation and conductivity measurement systems and calibrated reference sources for the following purposes
- Periodic verification required by standards such as ISO 17025
- Long-term performance monitoring
- Study of cable placement
- Study of Shielded Room Behavior
- Measurement of filter performance
- Cable insertion loss measurement
- Measuring amplifier gain and bandwidth
- Spectrum analyzer/receiver pre-check
YRS01 and YRS02 have the same product features:
- Selectable white noise or comb signal: flexible for different applications
- Stable output: repeatable measurements
- Frequency range 5kHz-1GHz: suitable for all types of applications such as conduction and radiation
- Compact size and easy to carry: suitable for comparison of different sites
- Battery-powered: no external power supply and no connecting cables are required for measurements
YRS01 and YRS02 use the same test method:
Utilized in radiated emission RE
For radiated emissions, two monopole antennas in different frequency bands are used, placed on top of the YRS, which is particularly suitable for checking the performance of the open field (OATS) and the darkroom.
The compact YRS reference source has a built-in battery to minimize the impact of the reference source itself on the test environment.The YRS reference source is housed in a metal case and can be placed directly on the ground plane as required for some tests.
Utilized in conductive emission CE
The YRS reference source with a 50Ω N-type connector allows the checking of conductive measurement systems to be accomplished directly. Two options are provided: the LSA03 provides a capacitive connection from the YRS output to an IEC 320 power socket, allowing the performance of devices such as LISNs or absorber clamps to be checked, and the NIA01 is provided to standard connectors such as RJ11, RJ14, RJ25 and RJ45 for checking the performance of ISNs.
Using the CNEV+ with an antenna the radiometric measurement system can be inspected, also equipped with a BNC connector available adapter (LSA02) providing a capacitive connection from the output of the CNE to a standard IEC 320 power connector, for inspection and evaluation of the conductive measurement system, e.g. the LISN or absorbing clamp used.
The YRS01 and YRS02 share some of the same technical parameters:
“Reminder: swipe tables left and right”5°C to 40°C, <±2.5dB, 9kHz-1GHz
code
paradigm
100kHz (50kHz, ......, 30.05MHz)
1MHz (0.5MHz, ......, 300.5MHz)
5MHz (2.5MHz, ......, 1.0025GHz)
15°C to 30°C, <±0.5dB, 5kHz-1GHz
5°C to 40°C, <±1.0dB, 5kHz-1GHz
Frequency:
5°C to 40°C, <±0.5ppm
Typical <±1ppm over a 12-month period
76mm diameter x 81mm (102mm with connector) with battery
External input 5.00V ± 0.25V, 300mA (Type B USB)
Difference between YRS01 and YRS02 - has different test configurations:
The difference between YRS01 and YRS02 is that the test configurations are different.
“Reminder: swipe tables left and right”- YRS01 Reference Source
- BP01 Rechargeable Battery Pack
- battery level
- Antenna, MON03
- Hard Case
- brochure
- Standardized test CAL16
- YRS01 Reference Source
- BP01 Rechargeable Battery Pack
- battery level
- Antenna, TLM02 and MON03
- LISN Adapter LSA03
- Hard Case
- brochure
- Standardized test CAL16
- YRS02 Reference Source
- Antenna, MON03
- Hard Case
- 4xAA batteries
- brochure
- Standardized test CAL16
- YRS02 Reference Source
- Antenna, TLM02 and MON03
- LISN Adapter LSA03
- Hard Case
- 4xAA batteries
- brochure
- Standardized test CAL16
Parts and options:
- TLM02: Top-loaded monopole antenna, optimal frequency range 30MHz-300MHz, 290mm high
- MON03: Monopole antenna, optimal frequency range 200MHz - 1GHz, 270mm high
- LSA03: LISN adapter with IEC type connector
- NIA01: ISN adapter with 2 socket outputs, 6-way RJ11/RJ14/RJ25 socket, 8-way RJ45 socket
- CAL16: Direct Output, 0 to 1 GHz Power Measurement with Spectrum Analyzer, All Operating Modes
- CAL17: Radiated output, measured at OATS with a receiver for 30MHz to 1GHz vertically and horizontally polarized electric fields, 3m or 10m distance. White noise, 1MHz and 5MHz comb signals
- CAL18: Radiated output, measured in the far field with a spectrum analyzer with electric fields vertically and horizontally polarized from 30MHz to 1GHz at a distance of 3 meters. White noise, 1MHz and 5MHz comb signals
Difference between YRS01 and YRS02 - with different output characteristic curves
YRS02 direct output spectrum at 0-0.5MHz
YRS02 direct output spectrum at 0-30MHz
YRS02 direct output spectrum at 0-1000MHz
Direct output spectrum of YRS01 at 0-0.5MHz
YRS01 direct output spectrum at 0-30MHz
YRS01 direct output spectrum at 0-1000MHz
Order No. EUTS0012