EMI test equipment and systems

Introduction：EMI test equipment and system is used in the process of EMC electromagnetic compatibility testing of a kind of instruments and systems, EMI test can detect the EUT itself through the power line, signal line, space and other ways to the outside of the propagation of the interference signal. The EMI test equipment and system provided by our company is to test the interference emitted by the EUT itself from various aspects and angles, in order to reach the limit value requirement of EUT certification standard.

EMI-test-instruments EMI test equipment and systems

Classification of EMI test equipment and systems:

Filter products by test frequency

Note: The current function is still being improved, most products have not yet added the test frequency attribute, and the current function is not fully applicable to all products! If you do not find a product, please use the menu bar - Search for Products or contact us for information.

Full product list of EMI test equipment and systems:

Total number of products available for sale in the current product category: 210; Total number of products on the current page: 8.

Conical Cover | Schwarzbeck | 9kHz-30MHz | CISPR15 ELV Luminaire Conical Cover

9kHz - 30MHz

Conical Cover | Schwarzbeck | 9kHz-30MHz | CISPR15 ELV Luminaire Conical Cover

Conical Cover is a CISPR15 standard EMC test accessory produced by SCHWARZBECK, Germany, which can be used to install E27, E12 and other lamps into the conical...

SW 9601 A2 Schwarzbeck 420MHz Current Probe

1kHz - 420MHz

SW 9601 A2 Schwarzbeck 420MHz Current Probe

The SW 9601 A2, manufactured by schwarzbeck, measures the conducted interference current on the cable or cable bundle of the DUT in accordance with EMC standards such as CISPR25, transfer impedance< 10 dBΩ(...).

FPC1000 and FPC1500 R&S Benchtop Spectrometers 5 kHz - 3 GHz

5kHz - 3GHz

FPC1000 and FPC1500 R&S Benchtop Spectrometers 5 kHz - 3 GHz

The FPC Sequence Spectrum Analyzers from R&S Germany include the FPC1000 and FPC1500 models, which are available for test frequencies up to 5 kHz - 1 GHz/2 GHz or 3 GHz, and are especially f...

Calibration Kit 8158 schwarzbeck ISN Calibration Adapter Kit

100kHz - 30MHz

Calibration Kit 8158 schwarzbeck ISN Calibration Adapter Kit

Calibration Kit 8158 The ISN calibration adapter product manufactured by Schwarzbeck, Germany, allows for calibration and metrology according to the EMC test standard CISPR 16-1-2 N...

ACS 503N EMTEST Three-Phase Harmonic Flicker Programmable AC Power Supply

10 Hz – 80 Hz

ACS 503N EMTEST Three-Phase Harmonic Flicker Programmable AC Power Supply

The ACS 503N series is a three-phase harmonic flicker programmable AC power supply from EMTEST, an AMETEK company, specifically designed for EMC electromagnetic compatibility harmonic and flicker testing, and can be used to measure rated currents over...

Compliance Test Studio 23 (CTS 23) EMTEST Harmonic Flicker Test Software

Compliance Test Studio 23 (CTS 23) EMTEST Harmonic Flicker Test Software

EMTEST Compliance Test Studio 23 (CTS 23) is harmonic and flicker test analysis software developed by EMTEST, a subsidiary of AMETEK. It features control capabilities...

AIF 503N EMTEST Standalone Flicker Resistance Module

47Hz - 63Hz

AIF 503N EMTEST Standalone Flicker Resistance Module

The AIF 503N is a standalone flicker impedance module manufactured by EMTEST, a subsidiary of AMETEK, specifically designed for EMC voltage flicker testing standards, including the reference impedance Zref (IEC 61000-3-...

ECSS LISN 3 Schwarzbeck 7μH 50Ω Artificial Power Supply Network

10 Hz – 150 MHz

ECSS LISN 3 Schwarzbeck 7μH 50Ω Artificial Power Supply Network

ECSS LISN 3 is a 7μH 50Ω artificial power network EMC test instrument manufactured by schwarzbeck, suitable for testing in accordance with European Space Standardization Cooperation guidelines at frequencies ranging from 10Hz to 150MHz...