COM-POWER

COM-POWER is an EMC test equipment manufacturer from the United States, specializing in EMC emission and immunity test solutions and test instrumentation to meet a variety of global EMC test standards.COM-POWER's products can be used in conjunction with test and certification level EMC compliance testing. The product line includes:

Comb Generator
Absorption clamp, electromagnetic clamp
Antenna kits, antenna poles - automatic and manual, EMI or EMS antennas, EMC-specific antenna tripods
Coupled decoupling networks, ISNs-impedance stabilization networks
Conducted immunity test systems, surge generators, power amplifiers
Magnetic field generator
Pre-compatible EMC test systems, spectrum analyzers, preamplifiers, near-field probes
RF Current BCI Probe, Calibration Fixture
System Controller
transient limiter
Feedthrough Capacitors
rotary (traffic)

Com-Power Corporation

Filter products by test frequency

Note: The current function is still being improved, most products have not yet added the test frequency attribute, and the current function is not fully applicable to all products! If you do not find a product, please use the menu bar - Search for Products or contact us for information.

COM-POWER full product list:

Total number of products available for sale in the current product category: 8; Total number of products on the current page: 8.

Com-Power Product Catalog 2026 Updated

Com-Power Product Catalog 2026 Updated

Com-Power USA manufactures RF receive/transmit antennas, comb signal generators, LISNs, preamplifiers, power amplifiers, current probes, and other EMC test instrumentation products. This page mainly lists all product catalogs, contact...

AL-130R Com-power 50cm loop antenna

9kHz - 30MHz

AL-130R Com-power 50cm loop antenna

The AL-130R is an active loop antenna manufactured by Com-power that complies with the ANSI C63.4-2014 standard and is tested from 9 kHz to 30 MHz with an antenna diameter of 5...

CGO-5100B com-power 18GHz Reference Signal Source

CGO-5100B com-power 18GHz Reference Signal Source

The CGO-5100B is an 18 GHz reference signal source, also known as an EMI radiation field reference source, manufactured by com-power Inc. in the United States, which can emit up to 18 GHz reference spectrum signals, with a built-in...

CGO-501 Compower 1.5GHz Radiated Noise Source

CGO-501 Compower 1.5GHz Radiated Noise Source

The CGO-501 is a 1.5 GHz radiated noise source manufactured by Compower, Inc. and is specifically designed for use in radiological site prediction test certificates for radio-wave darkrooms, but can also be used in OTA laboratories, semi-radio-wave darkrooms, and full radio-wave darkrooms for n...

cgc-510e compower 115MHz comb signal generator

cgc-510e compower 115MHz comb signal generator

The CGC-510E is a comb signal generator manufactured by compower, the main application is to be able to quickly validate LISN's conducted emission test program, and can be plugged directly into LISN's EUT power socket.CGC-510...

CGC-105 Com-power 10kHz-115MHz Conductivity Ratio Comb Signal Source

CGC-105 Com-power 10kHz-115MHz Conductivity Ratio Comb Signal Source

The CGC-105 is a conductivity comparison comb source for 10kHz-115MHz testing manufactured by Com-power Corporation in the U.S.A. The CGC-105 has smaller steps than the CGC-255E...

CGC-255E Com-power 50kHz-115MHz Conductivity Ratio Comb Signal Source

CGC-255E Com-power 50kHz-115MHz Conductivity Ratio Comb Signal Source

The CGC-255E is a conductivity comparison comb signal source for 50kHz-115MHz testing manufactured by Com-power, Inc. It is also a broadband EMC signal reference generator that can be used for E...

CG-515 Com-power 1MHz-1.5GHz Comb Signal Source

CG-515 Com-power 1MHz-1.5GHz Comb Signal Source

The CG-515 is a comb signal source from COM-POWER, Inc. that can be used for rapid pre-test site validation in a radio darkroom, and can generate 1MHz-1.5GHz...