EMS test equipment and system

Introduction：EMS test equipment and system is a kind of instrument and system used in the process of EMC electromagnetic compatibility test, EMS test on the EUT exerts interference, EMS injected interference, including magnetic field, electric field, voltage, current, pulse voltage, etc., EMS injected into the pathway, including the power line, the signal line, the space and other ways. The EMS test equipment and system provided by our company is to carry out anti-interference test on EUT from various aspects and angles, in order to reach the limit value requirement of EUT certification standard.

EMS test equipment and system

Classification of EMS test equipment and systems:

Filter products by test frequency

Note: The current function is still being improved, most products have not yet added the test frequency attribute, and the current function is not fully applicable to all products! If you do not find a product, please use the menu bar - Search for Products or contact us for information.

Full product list of EMS test equipment and systems:

Total number of currently available products: 204; Current page displays: 8 products.

CDN M2 300A 1500V | Schwarzbeck | 150 kHz–230 MHz | 2-wire 300A CDN

150kHz - 230MHz

CDN M2 300A 1500V | Schwarzbeck | 150 kHz–230 MHz | 2-wire 300A CDN

The CDN M2 300A 1500V is manufactured by Schwarzbeck in Germany and is authorized for distribution by Shenzhen EUTTEST. This product addresses the limitation of the original 2-wire CDN, which had a maximum current rating of only 125A, by increasing the single...

F-230607-1008-1 FCC 1500W Current Injection Probe

10MHz - 400MHz

F-230607-1008-1 FCC 1500W Current Injection Probe

F-230607-1008-1 is manufactured by the FCC in the U.S.A. The test frequency covers 10 MHz - 400 MHz, supports up to 1500W RF power injection into the DUT cable, and also supports 1000A...

F-230517-1008-1 FCC 1000W Current Probe 10MHz-400MHz

10MHz - 400MHz

F-230517-1008-1 FCC 1000W Current Probe 10MHz-400MHz

F-230517-1008-1 is manufactured by FCC, supports 1000W RF power injection in the frequency range of 10MHz-400MHz, and supports up to 2000A common-mode current, which is suitable for products rated at ...

F-250607-1008-1 FCC 1500W Current Injection Probe

10MHz - 400MHz

F-250607-1008-1 FCC 1500W Current Injection Probe

F-250607-1008-1 is manufactured and produced by FCC in the U.S.A. The test frequency covers 10MHz-400MHz, although it is large in size, it supports a maximum of 1500W RF power amplifier input, also...

F-250606-1008-1 Large Current Injection Probe with 65mm Diameter

4kHz - 400MHz

F-250606-1008-1 Large Current Injection Probe with 65mm Diameter

The F-250606-1008-1 is a 65mm diameter high current injection probe manufactured by FCC, Inc. that can be used in the frequency range of 4kHz to 400MHz in accordance with ISO11452-4 and other...

F-230523-1008-1 Injection Probe 4 kHz - 200 MHz

4kHz - 200MHz

F-230523-1008-1 Injection Probe 4 kHz - 200 MHz

F-230523-1008-1 is manufactured by FCC in the U.S.A. It has a test frequency of 4 kHz - 200 MHz, supports 1000A common mode current and 300W RF power, and is ideal for new energy vehicles with high voltage...

SW 9600 B2 SCHWRZBECK Current Transformer

1kHz - 420MHz

SW 9600 B2 SCHWRZBECK Current Transformer

SW 9600 B2 is a shielded BCI current transformer manufactured by schwarzbeck, Germany, that injects BCI interference currents into cables or cable bundles in accordance with ISO 11452-4, RTC...

F-230511-1008-1 FCC BCI Current Probe

4kHz - 10MHz

F-230511-1008-1 FCC BCI Current Probe

F-230511-1008-1 Manufactured by the FCC in the USA, this BCI current probe has a test frequency as low as 4kHz-10MHz, supports a maximum EUT size of 258mm, a maximum common-mode current of 2000A, a differential...