SW 9600 B2 SCHWRZBECK Current Transformer

SW 9600 B2 Transfer Impedance Calibration Test Results

Order Number: EUTS0885

Type: Current Injection Probes

Brand: Schwarzbeck

Min. order: 1 Unit

Stock:

schwarzbeck Real Time Inventory

Delivery: Click on the link above to inquire

Standards:

Industry： Automotive vehicle and component testing

Warranty: Original Import ; New Products ; Authorized Sales

Training: On-site training; Telephone; Email

Logistics: Shenzhen to National

Payment: Internet Banking T/T

Product Price:

Product Description:

The SW 9600 B2 is the newest shielded BCI current transformer from schwarzbeck in 2026 and can be used for injecting disturbing currents into cables or bundles of cables (a.k.a. high current injection test methods). The probe is equipped with a stainless steel spring that allows you to quickly open and close the probe, ensuring a comfortable and reliable opening and closing when using the probe to clamp the cable, after connecting the DUT cable to a coaxial N-type 50 Ω RF power output device, such as aSignal source around 400MHzrespond in singingPower amplifierFront-end equipment, such as the front-end equipment, to apply conducted interference sensitivity tests to your products.

Immunity testing using this equipment and method is described in several standards such as ISO 11452-4, RTCA DO-160 and IEC/EN 61000-4-6. EUTTEST, as one of the schwarzbeck China Authorized, will provide factory calibrated transmission impedance data for testing needs in compliance with the requirements of these standards.

Technical parameters：

Product Specification Sheet:

“Reminder: swipe tables left and right”

Model:

SW 9600 B2

Manufacturer:

Schwarzbeck

Agent supplier in China:

Shenzhen EUTTEST

Available frequency range:

1 kHz - 420 MHz

Connector (female):

Transmission impedance:

Typical: -20 dBΩ @ 8 kHz.;
Typical: 0 dBΩ @ 80 kHz.;
Typical: 15 dBΩ @ 1 MHz.;
Typical: 25 dBΩ (30-400 MHz)

Physical Dimensions:

104 x 45 x 79 mm

Maximum current:

~300 A (DC - 400 Hz)

Maximum RF input power (cw):

30 watts

conversion ratio

1:2

Primary Inductance:

Typical: 3.7 μH @100 kHz

Maximum pipe diameter:

31 mm

Current ring diameter:

32 mm

Weight:

~600g

An optional calibration fixture is available:

CF 9651

Optional current monitoring probes are available:

SW 9601 A2

“Reminder: swipe tables left and right”

Measurement calibration results:

The following chart shows the transfer impedance of the 9600B2 probe obtained after we contacted the metrology institute in China for metrology and calibration, which can be used for test result compensation and calculation.