MIL3000 EMC PARTNER National Military Standard CS115 and CS116 Test System

Introduction：

The MIL3000 is a new generation of military standard CS115 and CS116 test systems manufactured by EMC PARTNER. It fully meets the CS115 and CS116 test requirements of GJB 151B, MIL-STD-461F, etc. It is modular in design, and can be plugged into three types of modules: the CS115 module, MIL3-REC, the CS116 low-frequency module, MIL3-10K10M, and the CS116 high-frequency module, MIL3-30M100M, allowing the performance of either one or all of the CS115 and CS116 tests, CS116 Low Frequency Module MIL3-10K10M, and CS116 High Frequency Module MIL3-30M100M, allowing the performance of either or all of the CS115 and CS116 tests. The unit is easy to operate with touch screen based graphical operation. It is also equipped with a computer interface and software control to generate test reports as per the test requirements.

Key Features:

• The use of EPOS to control the generator includes a lot of new technology:
• 7-inch graphical color touch display
• Exceeds MIL-STD-461 maximum test level
• Ethernet connection to PC or laptop
• Test report data is stored inside the mainframe
• Test report data can be exported via USB or Ethernet
• Test Standards Library
• Front panel automatic test program run
• Modular results are simple to upgrade using
• One injection clamp for all tests (CS115 and CS116)
• Integration into TEMA3000 software

Technical Parameters.

(1) CS115 (MIL3-REC module)

• Rise time: <2ns
• Falling time: <2ns
• Duration: >30ns
• 100W load current range: 1A to 10A
• Repeatability: Maximum 30Hz (0.033s)" 10% -0%
• Source impedance: 50W

(2) CS116

• Oscillation frequency:
• MIL3-10K10M Modules: 10kHz, 100kHz, 1MHz, 10MHz
• MIL3-30M100M modules: 30MHz, 100MHz
• 100W load current range:
• 10kHz: 0.02A to 0.22A
• 100kHz: 0.20A to 2.00A
• 1MHz: 1.0A to 15.0A
• 10MHz: 2.0A to 12.00A
• 30MHz: 2.0A to 12.00A
• 100MHz: 1.0A to 6.00A
• Repetition rate: 0.5 to 999s

(3) Mainframe MIL3000

• Test time: 1 to 29999s
• Pulse polarity: positive/negative
• Weight of main unit: 17kg
• Machine size: 4U height, 450X500X190mm
• Module size: 200 x 280 x 80mm
• Module weight: about 2.5kg
• Temperature range: 0°C to 35°C
• Relative Humidity: 25% to 80%
• Pressure: 86 to 106 kPa

System accessories:

System accessories

Injection Clamp (Coupler) CN-BT6 Correction Unit VERI-MIL3 Frequency Range 10kHz to 100MHz for 10kHz to 100MHz Waveform Correction, Maximum Cable Diameter 60mm, Includes 2 x 20dB Attenuators and 1 x 50W Load.

Remote control and report generation software suite

• TEMA3000 Remote Control Software
• Test and sequence editing
• Report Generation

Order No. EUTS0031