EMS test equipment and system

Introduction：EMS test equipment and system is a kind of instrument and system used in the process of EMC electromagnetic compatibility test, EMS test on the EUT exerts interference, EMS injected interference, including magnetic field, electric field, voltage, current, pulse voltage, etc., EMS injected into the pathway, including the power line, the signal line, the space and other ways. The EMS test equipment and system provided by our company is to carry out anti-interference test on EUT from various aspects and angles, in order to reach the limit value requirement of EUT certification standard.

EMS test equipment and system

Classification of EMS test equipment and systems:

Filter products by test frequency

Note: The current function is still being improved, most products have not yet added the test frequency attribute, and the current function is not fully applicable to all products! If you do not find a product, please use the menu bar - Search for Products or contact us for information.

Full product list of EMS test equipment and systems:

Total number of currently available products in all categories: 203; Total products on this page: 8.

F-230509-1008-1 FCC 1000 Watt High Current Injection Probe

10MHz - 400MHz

F-230509-1008-1 FCC 1000 Watt High Current Injection Probe

F-230509-1008-1 is a current injection probe manufactured by FCC in the U.S.A., with an operating frequency of 10MHz-400MHz, supporting a maximum wire diameter of 65mm and operating current of

KEMZ 801B Electromagnetic clamp IEC EN 61000-4-6

10kHz - 1GHz

KEMZ 801B Electromagnetic clamp IEC EN 61000-4-6

KEMZ 801B is an electromagnetic clamp produced by TESEQ, a sub-brand of AMETEK-CTS, which complies with IEC/EN 61000-4-6 and the latest version of the national standard GB/T17626.6....

ESD-203G ±30kV Static Gun

ESD-203G ±30kV Static Gun

ESD-203G is an electrostatic gun that supports a maximum of ±30kV, meets the requirements of the latest version of the ISO10605-2008 version of the automotive electronics EMC immunity test standard, supports manual and automatic triggering, supports a minimum of 80V...

ESD-202G ±20kV ESD gun

ESD-202G ±20kV ESD gun

ESD-202G Electrostatic Discharge Gun is an EMC test instrument supporting ±20kV output voltage of air discharge and contact discharge, which meets the requirements of IEC61000-4-2 and GB/T17626.2 standards, and supports...

ESD-202E ±20kV ESD Generator

ESD-202E ±20kV ESD Generator

ESD-202E is an electrostatic discharge generator that can output ±20kV, supports air discharge and contact discharge modes, and is configured with a 330pF/330Ω discharge module that perfectly complies with IEC61000-4-...

F-203I-A-32mm FCC Electromagnetic injection pliers 32mm wire diameter

10kHz - 1GHz

F-203I-A-32mm FCC Electromagnetic injection pliers 32mm wire diameter

F-203I-A-32mm is an electromagnetic injection clamp fixture produced by FCC in the U.S.A. It meets the requirements of IEC61000-4-6 and the latest conducted immunity-electromagnetic clamp method of GB/T17626.6, and it can be used as a substitute of CD...

F-203I-A-23MM FCC Electromagnetic injection pliers for IEC 61000-4-6

10kHz - 1GHz

F-203I-A-23MM FCC Electromagnetic injection pliers for IEC 61000-4-6

F-203I-A-23mm is an electromagnetic injection clamp produced by FCC, which meets the requirements of IEC61000-4-6 and the latest conducted immunity-electromagnetic clamp method of GB/T17626.6, and the standard specifies...

CDN10 AF6 schwarzbeck 6-wire unshielded unbalanced line coupling decoupling network

10kHz - 230MHz

CDN10 AF6 schwarzbeck 6-wire unshielded unbalanced line coupling decoupling network

CDN10 AF6 is a 6-wire unshielded and unbalanced line coupling decoupling network product manufactured by schwarzbeck and authorized by Shenzhen EUTTEST for sales and quotation service. It can be used for having 6 unshielded and non...