F-203I-A-32mm FCC Electromagnetic injection pliers 32mm wire diameter

Product Description:

F-203I-A-32mm is the electromagnetic injection clamp fixture produced by FCC, and F-203I-A-23mm electromagnetic clamp, it also complies with IEC61000-4-6 and GB/T17626.6 of the latest conducted immunity-electromagnetic clamp method requirements, can also be used as a new option when you can't or can't use the CDN injection method, and this electromagnetic clamp can It can also be used as a new option when the CDN injection method cannot be used or is not feasible, and this electromagnetic clamp can accommodate larger 32mm wire diameters, which is very suitable for the conducted immunity signal injection of large-size cables.

Technical parameters：

Product Specification Sheet:

Calibration test results:

Calibration requires the F-203I-A-CF3-32mm-150 (150Ω calibrator) and F-203I-A-CF3-32mm-50 (50Ω calibrator) calibration fixtures to be used together, and additional equipment such as 50Ω loads and network analyzers.

So F-2031-A-32mm is the same as theF-203I-A-23mmThe two types of electromagnetic clamps use different calibration parts, so please purchase as needed.

It is still possible to calibrate the impedance, coupling and decoupling coefficients of this electromagnetic injection clamp according to the requirements of the IEC 61000-4-6 appendix.

Impedance Calibration Results

Decoupling factor calibration results

Order No. EUTS0848

Note: This product is branded as FCC - Fischer Custom Communications, Inc. and is not Federal Communications Commission (FCC) certified.

Note: Please refer to the original FCC factory data sheet for any changes in product parameters.

FCC Official Authorized Dealer:

EUTTEST is an official FCC authorized dealer, and the full official name of the company is: Fischer Custom Communications, Inc.

Ltd. is authorized by FCC to sell all FCC products in China and provide technical service for the products sold.

Click to view the image of the authorization