F-203I-A-23MM FCC Electromagnetic injection pliers for IEC 61000-4-6

Product Description:

F-203I-A-23mm is an electromagnetic injection fixture manufactured by FCC in the U.S.A. It complies with IEC61000-4-6 as well as the latest Conducted Immunity-Electromagnetic Clamp Method of GB/T17626.6. The standard explains that RF electromagnetic fields often degrade the performance of electronic equipment by generating common-mode currents in the cables, which can be injected into the cables of the equipment under test to verify its immunity to these electromagnetic fields. When it is not possible or suitable to use the capacitive direct coupling method to test the immunity of the electronic equipment, such as the CDN method, we can use the F-2031-A-23mm this kind of Efficient, broadband clamp-on injection equipment instead of the CDN method.

Technical parameters：

Product Specification Sheet:

Calibration test results:

According to the requirements of Appendix A of the standard GB/T 17626.4, we need to calibrate the impedance, decoupling coefficient, coupling coefficient, insertion loss, and other parameters of the electromagnetic clamp used, and the calibration needs to be used together with the calibration fixture of F-203I-A-CF3-23mm-150 (150 Ω calibrator) and F-203I-A-CF3-23mm-50 (50 Ω calibrator). Additional equipment such as a 50Ω load, network analyzer, etc. is also required.

Calibration Configuration Chart

The following test data can be obtained by connecting the product with the relevant calibration instrument as shown above.

Impedance calibration results graph

Decoupling coefficient calibration results graph

If your cable diameter exceeds 23 mm, we offer another cable that can accommodate larger diameters.F-203I-A-32mm Electromagnetic clamps are available for your purchase, welcome to contact for product quotation information.

Order No. EUTS0847

Note: This product is branded as FCC - Fischer Custom Communications, Inc. and is not Federal Communications Commission (FCC) certified.

Note: Please refer to the original FCC factory data sheet for any changes in product parameters.

FCC Official Authorized Dealer:

EUTTEST is an official FCC authorized dealer, and the full official name of the company is: Fischer Custom Communications, Inc.

Ltd. is authorized by FCC to sell all FCC products in China and provide technical service for the products sold.

Click to view the image of the authorization