U.S. FCC Catalog and Quotation Current Probe-TEM-CDN-ISN-LISN

FCC Profile:

FCC is the abbreviation of Fischer Custom Communications, Inc. in the U.S. The U.S. FCC product catalog mainly includes the most representative RF current probes (current injection probes, current monitoring probes, surface current probes) for DC-6GHz, TEM cells for IC testing, coupling and decoupling networks CDN, CISPR22/32 ISNs, single-phase and three-phase LISNs, and other equipment. CISPR22/32 compliant ISNs, single-phase and three-phase LISNs, and other equipment. This page mainly displays the product catalog produced by FCC, you can directly provide the product model number to EUTTEST to get the quotation information.

Products comply with the standard.

FCC USA's products meet the following standards:

• IEC/EN 61000-4-6
• MIL-STD-461/462
• EN55022/CISPR 22/CISPR32 standards
• Pulse Generator for MIL-STD- 188-125
• EMP test systems are used to verify the ability of sensitive electronic equipment to withstand EMP, high power microwaves and other electromagnetic threats.
• Transient protection devices:Transient protection devices or surge suppressors are used to protect sensitive electronic communications equipment from lightning, EMP, high power microwaves and other electromagnetic threats. Surge suppressor models are available for frequencies above 3 GHz.
• Data Line Suppressor:Available for 10/100/1000 Base T systems.

EUTTEST Service Profile for FCC Products::

EUTTEST agent sales of all U.S. FCC products, we provide a new current probe and its ancillary products offer, training, after-sales service, in the supply will be provided together with the factory calibration data, if necessary, but also to provide door-to-door training services, if you need a complete test system, we can also use the existing RF signal source, RF cable, power amplifiers and other related equipment for you to set up EMC test system in line with the standard requirements. If you need a complete test system, we can also utilize existing RF signal sources, RF cables, power amplifiers and other related equipment to set up an EMC test system that meets the standard requirements for you.

FCC catalog classification:

Current Probe:

Current probes, also called current clamps or current probes, are one of the frequently used test equipment in EMC EMC measurements and tests. The principle is based on the theoretical basis of Faraday's law and Lenz's law.

FCC current probes are available in the following three types. Due to the large number of models, you can click on the current probe types below to obtain more information about the available models and technical specifications.

• FCC Current Injection Probe
• FCC Current Monitoring Probe
• Surface Current Monitoring Probes

With the exception of the Surface Current Probe, which is used on the surface of a product or cable, the other two probes can be clamped directly onto the EUT's cable under test. The FCC Current Injection Probe injects high-frequency current interference signals, and the FCC Current Monitoring Probe tests for high-frequency current disturbances on the EUT's object to be tested.

Capacitive voltage probe:

FCC currently offers only one capacitive voltage probe product:

Electromagnetic injection pliers:

FCC offers injected electromagnetic clamps for IEC 61000-4-6 testing.

DCN electromagnetic decoupling clamp:

According to the latest version of IEC61000-4-6 ED4.0, you need not only an electromagnetic injection clamp but also an electromagnetic decoupling clamp to ensure that the test results are not influenced by external devices.

LISN linear impedance stabilization network:

Check out the details:FCC Linear Impedance Stabilization Web Catalog

TEM Cell:

FCC produces TEM Cells that are primarily used for integrated circuit EMC testing.

CDN coupling decoupling networks:

The CDN coupling decoupling networks produced by FCC can be categorized into five different types, each of which corresponds to different I/O port requirements, and may also require the purchase of a 50-150Ω impedance converter for final testing.

We've organized all of the Coupled Decoupled Networks products being sold by the FCC on a new page:FCC Coupling & Decoupling Networks Catalog

While all of the above CDNs are used for injecting RF interference tests, the Telcom Surge type of CDN below is used for injecting voltage pulses into a product's power supply, e.g., for communications surge testing.

Pulse Generator:

Pulse generators produced by FCC are controlled by the U.S. Contact us for inquiries about whether you can purchase them.

Gas discharge tubes:

The gas discharge tubes produced by FCC are controlled by the U.S. Contact us for inquiries on whether we can procure them.

Order No. EUTS0035