When measuring the common mode current conduction emission of EUT cables, it is important to ensure the repeatability of the EMC-CE measurements. If the test environments and conditions in Laboratory A and Laboratory B are completely different, the two laboratories will get different common mode current...

This article focuses on how to improve the signal-to-noise ratio of spectrum analyzer and current probe measurements, the higher the signal-to-noise ratio, the higher the dynamic range of the entire test system. Spectrum analyzer has many test methods, we only use the current probe test method to analyze how to improve...

When using FCC current probes for common-mode conduction current (CE) measurements, we need to pay special attention to the signal-to-noise ratio of the entire test system if very small common-mode currents are being measured, because the FCC current probes are connected to the receiver (spectrum analyzer...