V-shaped linear impedance stabilization network

This page displays information about the V-type linear impedance stabilization network instrumentation that EUTTEST represents and sells. You can click on the product links below to view the detailed technical specifications.

Learn more about the definitions of LISN and V-LISN terminology:LISN-Linear impedance stabilization network

Test application:

The V-LISN can measure asymmetrical disturbance voltages between (L1 - Ground) or (L2 - Ground) for a single single-phase power supply, as well as between (Positive - Ground) or (Negative - Ground) for a DC power supply.
V-LISN is also known as V-ANM (Artificial Power Network).V-LISN is the most commonly used LISN for EMC test requirements.

Classification:

There are two types of V-LISNs with different impedances. the V-LISN with an inductance of 5 µH (CISPR 16-1-2, CISPR 25, ISO 7637, DO 160) is typically used for measurements on vehicles, ships, and aircraft equipment connected to DC or 400 Hz on-board power supplies. Another type of V-LISN with 50 µH is expected to operate at a power supply frequency of 50 Hz or 60 Hz according to CISPR 16-1-2, MIL STD 461 and ANSI C63.4.