R&S ENV432 3-Phase LISN 4-Wire V-Network

Product Description:

The R&S ENV432 is a four-wire V-shaped artificial power network manufactured by R&S in Germany and distributed by EUTTEST. The ENV432 meets the requirements of CISPR 16-1-2, EN 55016-1-2 and ANSI C63.4 for V-shaped networks with an analog impedance of (50 μH + 5 Ω) in the frequency range from 9 kHz to 30 MHz. | 50 Ω with a Schuko socket (EUT 1) for the connection of the equipment under test (EUT) and a CEE 32 A socket (EUT 2).

R&S ENV432 productsFeatures:

• 9 kHz to 30 MHz frequency range
• Power Handling Capacity (up to 32 A), Constant Current
• Analog impedance (50 μH + 5 Ω) || 50 Ω according to CISPR 16-1-2
• V-networks according to CISPR, EN, VDE, ANSI, FCC Part 15 and MIL-STD-461D, E and F
• Calibrated according to CISPR 16-1-2 and ANSI C63.4

R&S ENV432Product Advantage:

• Empty core design as well as analog hand
• The R&S ENV432 4-wire V-network is based on an air-core inductor and contains an analog hand.
• Built-in 10 dB attenuator
• In order to ensure a standard impedance (without taking into account the input fading of the measuring receiver), the
• Equipped with a 10 dB attenuator.
• Built-in pulse limiter (can be turned off)
• A built-in pulse limiter (can be turned off) protects the measurement receiver input.
• Automatic temperature monitoring euttest
• The fan of the R&S ENV432 switches on automatically when the internal temperature of the housing reaches approximately +50 °C. This protects the V-network from high constant current loads. This protects the V-network from high constant current loads.
• Remote control of TTL levels (compatible with Rohde & Schwarz measurement receivers)
• TTL control inputs are available through the controller orRohde & Schwarz EMI Measurement ReceiverDrive for remote control of phase selection in automated test systems.

R&S ENV432 Technical Data::