- Shenzhen EUTTEST Technology Co.,Ltd.
- Electromagnetic test equipment
- EUT TEST
This catalog will show the Division I wrote the EMC electromagnetic compatibility related test standards specified test methods and standard analysis, our information only introduces the more focused standard introduction and test equipment equipment related issues, such as learning the standard, please check the original standard directly, the Division I wrote the article is for reference only, for the analysis of the standard we put forward the viewpoints and standards are inconsistent with the content of the standard, please contact yourselves! Standard publisher for more information.
This article introduces the military equipment testing EMC should be in accordance with the standard GJB151B-2013 on the receiver and signal generator performance requirements to prepare the standard electromagnetic compatibility test equipment. For the EMI part of the test, we need to pay attention to the relevant requirements of EMI receivers and important equipment...
EUT is in the EMC industry is the English abbreviation for the object to be measured / to be measured, this paper focuses on the GJB151B-2013 EUT requirements for what aspects of the EUT, including the layout requirements, EUT interconnection cable laying, working conditions and other requirements.
This page summarizes how to select the correct test layout method according to our military standard GJB151B-2013 for the EUT. Unless otherwise specified, the EUT of the DUT in all test items of GJB151B-2013 should be built in accordance with the test configuration of Figure 1 - Figure 5 . Our company for the majority of customers...
This paper describes the EMC test items required by the U.S. military equipment EMC standard, MIL-STD-461F, which has been published in various versions including MIL-STD-461 C\D\E\F\G and so on. The content of this paper is built on the MIL-STD-461F...
IEC 61067-2 defines a method for measuring electromagnetic emissions from integrated circuits (ICs). The IC being evaluated is mounted on an IC test printed circuit board (PCB) that is clamped to a top or bottom cut in a transverse electromagnetic (TEM) or broadband gigahertz TEM (GTEM) chamber of...
IEC 61967-1:2018 is available as IEC 61967-1:2018 RLV which contains the International Standard and its revisions showing all changes in the technical content compared to the previous edition.IEC 61967-1:2018 provides information on the integrated circuits transmitting...
GB4824-2019 will be formally implemented on July 1, 2020, when GB4824-2013 will be replaced and invalidated, this article introduces the GB 4824-2019 standard update analysis, including the name of the standard and the corresponding international standards, the name of the European Union standards, and lists...
GB/T 42968.2-2024 has been officially released and implemented on October 26, 2024, which makes us no longer confined to using the old standard YD/T 1690.2-2007 to complete the EMC test of integrated circuits in the radiated immunity test project, the new standard...
EUTTEST website search：
Enter information such as instrument and equipment model
Wait for real-time search results to be listed