Introduction：
The P603-1 is a 1Ω high frequency current probe manufactured by Langer-EMV and distributed by EUTTEST, available for frequencies from 0.2kHz to 3GHz. The P603-1 complies with IEC 61947-4 for 1Ω direct-coupled testing.
P603-1 Test the scope of application:
Used for direct measurement of high frequency (RF) currents on IC integrated circuit pins, mainly used forGround pins (Vss) and signal pinsThe P603-1 has pin contacts to reach and make measurements on each pin of the IC. The P603-1 has pin contacts to reach and make measurements on each pin of the IC.
P603-1 Test System Contact IC Pin Test Chart
The main technical parameters of the P603-1:
<<<<提醒：左右滑动表格>>>>| Frequency range | DC-3GHz |
| Output impedance | 50Ω |
| connector | SMB |
| act on behalf of sb. in a responsible position | EUTTEST |
| Voltage transfer coefficient | -6 dB |
| Ammeter | |
| splitter | 1 Ω |
| Current correction factor R | -6 dBΩ |
| inductors | 1 nH |
| Maximum power loss | 2.5 W |
Parameter Chart for P603-1
P603-1 Current Correction Factor
P603-1 Equivalent Circuit Diagram for Testing on IC Pins
P603-1 Integrated Circuit Test System Configuration Diagram
P603-1 Detailed Configuration Contact EUTTEST for more information.
