Product Description:
R&S ESRP EMI test receiver is produced by Germany R&S and sold by Shenzhen EUTTEST agent products, ESRP can be used for 3.6GHz or 7GHz conducted and radiated emissions test, EUTTEST has a wealth of on-site debugging experience, can be set up for you!Test systems that comply with EMC standards for each productThe
Feature Description:
The ESRP is designed for diagnostic measurements during development and pre-compliance measurements to prepare products for final certification testing. It measures electromagnetic interference in the frequency range from 10Hz to 7GHz using either conventional step frequency sweeps or FFT-based time domain sweeps, a method that significantly speeds up measurements. At the same time, the ESRP is a full-featured, powerful laboratory signal and spectrum analyzer.The ESRP comes with a simple menu structure combined with an intuitive touch screen that makes theEMI TestingVery easy to operate in any mode.
Results of EMI final measurement with R&S ESRP receiver
R&S ESRP Product Technical Data:
“Reminder: swipe tables left and right” R&S-ESRP3
9 kHz to 3.6 GHz
R&S-ESRP3 (R&S-ESRP-B29 option)
10 Hz to 3.6 GHz
R&S-ESRP7 (R&S-ESRP-B29 option)
10 Hz to 7 GHz
RF attenuation ≥ 10 dB;
Turn off the RF preamplifier
RF attenuation ≥ 10 dB;
Open RF
Preamplifiereuttest
30 dBm (= 1 W)
euttest
23 dBm (= 0.2 W)
RF attenuation ≥ 10 dB
150 V
RF attenuation ≥ 10 dB; 10 μs
1 mWs
RF attenuation 0 dB;
Turns off the RF preamplifier as well as the preselection
+3 dBm, nominal
Analyzer mode (≥ 10 Hz) and receiver mode
10 Hz to 10 MHz (-3 dB) in 1/2/3/5/10 steps
Analyzer and receiver mode
200 Hz, 9 kHz, 120 kHz (-6 dB),
1 MHz (pulse bandwidth)
With R&S-ESRP-B29 option (in analyzer as well as receiver mode)
Increase 10 Hz to 100 kHz
(-6 dB), in decimal steps
Can be turned off in analyzer mode
16 fixed filters
Can be turned on/off
1 kHz to 7 GHz, 20 dB gain, nominal
Analyzer mode (scan time)
Frequency span = 0 Hz
1 μs to 16 000 s
Frequency span ≥ 10 Hz (scanning)
1 ms to 16 000 s
Frequency span ≥ 10 Hz (FFT)
7 μs to 16 000 s
Receiver mode (stepped frequency sweep)
50 μs to 100 s (depending on frequency)
Receiver mode (time domain scanning)
50 μs to 100 s (depending on frequency subrange)
Receiver mode (stepped frequency sweep)
Minimum 1 Hz euttest
Receiver mode (time domain scanning)
0.25 × IF bandwidth
receiver mode
Maximum Peak, Minimum Peak, Quasi-Peak, Root Mean Square, Mean, Mean with Measurement Time Constant (CISPR Mean), RMS Mean (CISPR-RMS)
Receiver Mode, Nominal, Average Detector (AV), RF Attenuation 0 dB, Terminated 50 Ω
Turn off the RF preamplifier
500 MHz with 120 kHz bandwidth
< 6 dBμV
3 GHz, 1 MHz bandwidth
< 17 dBμV
Turn on the RF preamplifier
500 MHz with 120 kHz bandwidth
< -7 dBμV
3 GHz, 1 MHz bandwidth
< 5 dBμV
Analyzer mode (standard)
101 to 32 001
Analyzer Mode (EMI)
101 to 200 001
receiver mode
Maximum 4 000 000
Continuous Wave Signal, Level 0 dB to -70 dB (below reference level), S/N > 20 dB, Auto Sweep Time, RF Attenuation 10 dB, 20 dB, 30 dB, 40 dB, Preselection On, Span/RBW <100, 95% Confidence, +20°C to +30°C
9 kHz ≤ f < 3.6 GHz
0.47 dB
3.6 GHz ≤ f ≤ 7 GHz
0.57 dB
ESRP receivers come standard and optional:
“Reminder: swipe tables left and right” “Reminder: swipe tables left and right”
Order No. EUTS0653
R&S ESR Rohde & Schwarz
F-52B FCC 
F-14 FCC 
NSLK 8128 Schwarzbeck 
NNLK 8129 Schwarzbeck 
TK 9420 Schwarzbeck 
NNLK 8121 Schwarzbeck