CDN M3PE 16A 1000V SCHWARZBECK 3-wire coupled decoupling network

Order Number: EUTS0578
Brand: Schwarzbeck
Origin: Germany | Import

Min. order: 1 Unit
Delivery: Click on the link above to inquire

Standards:
Industry: General Electronics

Warranty: Original Import ; New Products ; Authorized Sales
Training: On-site training; Telephone; Email
Logistics: Shenzhen to National
Payment: Internet Banking T/T

Product Price:

Introduction:

CDN M3PE 16A 1000V is a 3-wire coupling and decoupling network manufactured by SCHWARZBECK Company in Germany, authorized by Shenzhen EUTTEST Company for sales and quotation service. This CDN coupling and decoupling network supports DUT line-to-ground voltage up to 500V AC and 1000V DC, and maximum saturation current up to 16A, which can be used for EMC testers to conduct conducted common-mode immunity test according to IEC 61000-4-6 Annex D.2, and is suitable for conducting immunity test along the power line of unshielded AC and DC power lines (utility). It is suitable for conducting immunity tests along power lines for unshielded AC and DC power lines (mains).

Both this model and the CDN M2M3PE 16A have 16A pass-through current, but the CDN M3PE described on this page is slightly less powerful in that it only supports the CDN-M3 test mode and cannot be switched to CDN-M2 test use. If you want to test M2 or M3 mode, please purchase the CDN M2M3PE 16A The

Technical parameters:

Product Specification Sheet:

“Reminder: swipe tables left and right”
Model number
CDN M3PE 16A 1000V
Device name
Three-wire coupled decoupling network-CDN
manufacturer
Schwarzbeck
China Agent Sales
EUT TEST
Test frequency range
150kHz-230MHz
Common mode impedance of CDN
At 150 kHz - 24 MHz: 150 Ω ±20 Ω
At 24MHz - 80MHz: 150 Ω +60 Ω / -45 Ω
80 MHz - 230 MHz: 150 Ω ±60 Ω
See common mode impedance graph below for detailed values.
Maximum RF Voltage
30V
Maximum input power
6W
connector
BNC
impedance
50Ω
Maximum Operating Voltage - Line to Ground
500V AC
1000V DC
Maximum operating voltage - line to line
1000V AC
2000V DC
saturation current
16A
size
216 mm*105 mm*108 mm
weight
1.4 kg
Recommended Calibration Options
CA 3/4
SR 30/4
SR 100-6W
“Reminder: swipe tables left and right”

Common mode impedance plot:

The following figure shows the common mode impedance curve of this product in accordance with the requirements of IEC 61000-4-6 and GBT 17626.6 conducted immunity test standard, the red line in the figure represents the impedance value range given by the standard.

CDN M3PE 16A SCHWARZBECK Common mode impedance plot of a single line coupled decoupling network

Common mode impedance graph

Product Recommendation:

  • Learn how to shop for a CDN?
  • Need CDNE?
  • Need more CDN & CDNE Coupling & Decoupling Networks models with test voltages and number of cables under test?

Please go to the following link to view:

Difference between CDN and CDNE Schwarzbeck Coupling Decoupling Networks Product Catalog

 

Order No. EUTS0578

Schwarzbeck Official Authorized Dealer:

EUTTEST is an official authorized distributor of SCHWARZBECK, whose full official name is: SCHWARZBECK MESS - ELEKTRONIK OHG

Ltd. is authorized by schwarzbeck to sell all products in China and provide technical service for the products sold.

Entered. 0/100

Sales Hotline:13425158926

Sales mailbox:sales@euttest.com

Sales WeChat account: euttest

EUTTEST-inquiry-wechat Shenzhen EUTTEST Technology Co.

Contact Sales by WeChat

Sales QQ:3127609248

[715] DISCLAIMER: Reproduction and redistribution by anyone without written permission from EUTTEST is prohibited.

Product parameters are subject to the manufacturer's final version.

If you like our products, please press Ctrl + D shortcut to favorite this product.