Introduction：
F-14A is a 500kHz monitoring current probe manufactured by FCC (Fischer Custom Communications, Inc.) and authorized to be sold by Shenzhen EUTTEST, available in the frequency range of 10Hz to 500kHz, and can operate up to 400 amperes without changing its transmission impedance in the DC-400Hz frequency range. transmission impedance, the 14A version is F-14 The high current test probe version of the model allows for 25A continuous wave current testing. The RF current tested by the current probe will be fed back to the receiver or spectrometer display via the RF cable.
Technical parameters：
<<<<提醒：左右滑动表格>>>>| Model number | F-14A |
| Product name | 500kHz monitoring current probe |
| manufacturer | U.S. FCC |
| agent | Shenzhen EUTTEST |
| Available frequency range | 10Hz - 500kHz |
| Internal Ring Diameter | 67 mm |
| External ring diameter | 142 mm |
| high degree | 53mm |
| Typical ZtΩ | 0.12 |
| Typical dBΩ | -18.5 |
| connector | N Female, 50 Ohm |
| industrial frequency current | 400 A (DC - 400 Hz) |
| Continuous wave current | 25A |
| peak pulse current (physics) | 500A 1: Calibrate the probe with a 50Ω+j0Ω load impedance. 2: Depends on pulse width and pulse repetition rate. |
| Optional calibration fixture | fcc-mpcf-2-67/142/53 |
| packing list |
|
Transmission impedance graph.
(Used to test corrections, contact EUTTEST for more information on usage)
Transmission Impedance Curve
FCC: Product specifications are subject to change without notice.
