HFG02KIT01 Comparison Signal Source for Period Verification of Harmonic Scintillation Testers 2.4kHz

Introduction：

The HFG02KIT01 is a harmonic and flicker EMC test comparison signal source kit produced by York in the UK and sold by EUTTEST in Shenzhen, mainly used for the calibration and metrology of harmonic and flicker analyzers as required by the EMC standard, the kit contains a HFG02 main harmonic and flicker signal generator, the HFG02 is a multi-functional electronic load allowing the user to harmonic and flicker The HFG02 is a multifunctional electronic load that allows the user to periodically check the calibration of harmonic and scintillation test instruments and to verify that they comply with the test requirements of the following standards:

• IEC/EN61000-3-2
• IEC/EN61000-3-3
• GB 17625.1
• GB 17625.2
• GB 17625.3

The HFG02 provides a stable and easy way to check the performance of a test instrument. The HFG02 can be sharply controlled and calibrated directly to the test results, and can be used by connecting the HFG02 directly to the EUT port of a harmonic scintillation test instrument to carry out a test without the need to configure additional equipment. The HFG02 can be manually switched between harmonic and flicker test output modes.

with respect to HFG01KIT01 Please contact EUTTEST for more information on the difference between the HFG02KIT02 and the HFG02KIT02.

EUTTEST also offers harmonic flicker test equipment to IEC/EN61000-3-2 and IEC/EN61000-3-3, contact us for more information.

Configuration diagram for the use of calibrated harmonic scintillation test instruments

Technical parameters：

Product Specification Sheet:

Fixed mode output harmonics result fixed harmonics mode

Fixed mode output harmonics result fixed harmonics mode-10Hz

Fluctuating mode output harmonics result fluctuating harmonics mode

Interharmonics modes output harmonic results Interharmonics modes

Analog 230V actual EUT output results

Flicker test results

Order number: EUTS0011