EMI test equipment and systems

Introduction：EMI test equipment and system is used in the process of EMC electromagnetic compatibility testing of a kind of instruments and systems, EMI test can detect the EUT itself through the power line, signal line, space and other ways to the outside of the propagation of the interference signal. The EMI test equipment and system provided by our company is to test the interference emitted by the EUT itself from various aspects and angles, in order to reach the limit value requirement of EUT certification standard.

EMI-test-instruments EMI test equipment and systems

Classification of EMI test equipment and systems:

Filter products by test frequency

Note: The current function is still being improved, most products have not yet added the test frequency attribute, and the current function is not fully applicable to all products! If you do not find a product, please use the menu bar - Search for Products or contact us for information.

Full product list of EMI test equipment and systems:

Current Product Categories: Total number of products available for sale: 216; Total on this page: 8 products.

CDNE M3 | Schwarzbeck | 30MHz-300MHz | Coupling and Decoupling Networks for Three-Wire Radiation

30MHz - 300MHz

CDNE M3 | Schwarzbeck | 30MHz-300MHz | Coupling and Decoupling Networks for Three-Wire Radiation

CDNE M3 is a coupling and decoupling network produced by Schwarzbeck, Germany and authorized to be sold by EUTTEST in Shenzhen, which is mainly used for testing CISPR 15 and EN 55015 ...

CDNE M2 | Schwarzbeck | 30MHz-300MHz | 2-Wire Coupling Decoupling Networks

30MHz - 300MHz

CDNE M2 | Schwarzbeck | 30MHz-300MHz | 2-Wire Coupling Decoupling Networks

CDNE M2 is a two-wire coupling decoupling network EMC equipment produced by Schwarzbeck, Germany, dedicated to CISPR15, GB17743 and other lamps and lanterns EMC standard requirements of the radiated emission test, M2...

FCC-BCICF-4 FCC Current Injection Probe Calibration Fixture

FCC-BCICF-4 FCC Current Injection Probe Calibration Fixture

FCC-BCICF-4 is produced by FCC Fischer Custom Communications, Inc. and authorized to be sold by EUTTEST in Shenzhen, China....

F-220126-1005-2 | FCC | 10kHz-400MHz | CISPR25 Current Clamps

10kHz - 400MHz

F-220126-1005-2 | FCC | 10kHz-400MHz | CISPR25 Current Clamps

F-220126-1005-2 is produced by the U.S. FCC and authorized by the Shenzhen YiYuTechnology Test Co.

F-220126-1005-1 | FCC | 10kHz-400MHz | CISPR25 Current Probe

10kHz - 400MHz

F-220126-1005-1 | FCC | 10kHz-400MHz | CISPR25 Current Probe

F-220126-1005-1 is an FCC-produced current probe and current clamp product that covers the frequency range of 10 kHz to 400 MHz and complies with the CISPR25 Current Probe Test Requirements....

F-220124-1005-1 | FCC | 10kHz-1GHz | DO-160 Monitor Current Probe

10kHz - 1GHz

F-220124-1005-1 | FCC | 10kHz-1GHz | DO-160 Monitor Current Probe

F-220124-1005-1 is a DO-160 monitoring current probe manufactured by FCC (USA) and authorized by EUTTEST (Shenzhen) for sale in China, the test frequency of this probe can be up to 1...

F-220121-1005-1 | FCC | 10kHz-1GHz | 32mm Current Monitor Probe

10kHz - 1GHz

F-220121-1005-1 | FCC | 10kHz-1GHz | 32mm Current Monitor Probe

F-220121-1005-1 is a current monitoring probe manufactured by the FCC. The probe snaps directly onto the power or signal line of the DUT for radiation testing from 10kHz to 1GHz ...

F-220114-1005-1 | FCC | 10kHz-1GHz | RF Current Probe

10kHz - 1GHz

F-220114-1005-1 | FCC | 10kHz-1GHz | RF Current Probe

The F-220114-1005-1 is a 1 GHz current monitoring probe from FCC that can be used to measure 10 kHz to 1 GHz conducted and transmitted common-mode nuisance currents on electronics power lines....