DPA 503N EMTEST Three-Phase Harmonic and Flicker Tester

Product Description:

The DPA 503N is a fully compliant three-phase harmonic and flicker analyzer manufactured by EMTEST of Switzerland, meeting the latest IEC/EN 61000-3-2 and -12, IEC/EN 61000-3-3 and -11, as well as JIS 61000-3-2 and -12. The device itself adheres to the design specifications of IEC/EN 61000-4-7 (applicable to Class I instruments) and IEC/EN 61000-4-15. This product is distributed and quoted by Shenzhen EUTTEST.

Other features:

Standard library with preset programs, gap-free recording for post-processing analysis and standard/classification changes, pass/fail evaluation, test report generator (customizable), advanced analysis with access to detailed test data.

Compliant with IEC standards:

Harmonic testing meets the following standards:

• IEC 61000-3-2 Editions 3.2, 4, 5, 5.1, 5.2
• IEC 61000-3-12 Editions 1, 2, 2.1
• JIS C 61000-3-2 Edition 2005, 2019
• EN 12015 2014
• IEC 61000-3-16 Edition 1
• ECE R10, versions 5 and 6
• Ecodesign LED (CELEX 2019/2020)
• Various manufacturer standards

The flicker test meets the following standards:

• IEC 61000-3-3 Edition 1.2, 2, 3, 3.2
• IEC 61000-3-11 Edition 1, 2
• DIN EN 61000-3-3 Supplement 1
• ECE R10, versions 5 and 6
• Various manufacturer standards

Product Features:

• Compact Harmonic and Flicker System
• Digital power analyzer/flicker meter in accordance with IEC standards.
• Integrated switchable flicker impedance Zref and Ztest
• Wide harmonic measurement range
• IEC 61000-3-2 / -12 Harmonics
• IEC 61000-3-3 / -11 Software for comprehensive flicker analysis and reporting

Flicker Test Requirements Configuration:

The DPA503N can measure flicker only when used with the three-phase flicker impedance device AIF 503N (available with four different rated currents: 16, 32, 63, or 75 A) to comply with the requirements of IEC 61000-3-3 and IEC 61000-3-11.

AIF 503N16 (16 A)

AIF 503N32.1 (32 A)

AIF 503N63.1 (63 A)

AIF 504N75.1 (75 A)

For more details, see the AIF 503N product introduction.

Power Supply Requirements:

Three-phase harmonic or flicker testing requires the combination of a power supply and impedance module to form a harmonic flicker test system for operation.

Technical parameters：

Product Specification Sheet:

Note: If you only need to test single-phase EUTs, please purchase from EUTTEST's authorized distributors.DPA 500N maybe DPA 500N1.1The

Contact EUTTEST to obtain harmonic and flicker EMC testing system solutions and quotation information tailored to your product requirements.