INS-1250-7K5 EMCpartner Pulsed Insulation Test Generator 7.5kV

Introduction：

INS-1250-7K5 is manufactured by EMCpartner, Switzerland and distributed by EUTTEST.INS Sequential Pulse Insulation Test GeneratorWith a pulse repetition rate of 1 pulse per second up to 3.5 kV, and 1 pulse every 8 seconds at 30 kV, the INS is probably the fastest insulation test system in the world. 7.5 kV models can subsequently be upgraded to 15 kV, and 22.5 kV models to 30 kV. Output impedance is selectable from 40 Ω - 4 kΩ (default 40 Ω).

Technical parameters：

The INS is a serial model that includes the INS-1250-7K5, INS-1250-15K, INS-1250-22K5, and INS-1250-30K;

Three other generators:

• INS-1250-15K The following is an example of the type of power supply that can be used with a 15 kV impulse 1.2/50 μs, 40 Ω and/or custom output.
• INS-1250-22K5 The following is an example of a customized output for a 22.5 kV impulse 1.2/50 μs, 40 Ω and/or custom output.
• INS-1250-30K The following is an example of the type of power supply that can be used with a 30 kV impulse 1.2/50 μs, 40 Ω and/or custom output.

circuit module

INS-0805, 500 ohm output/ 0.5 J with 0.5 kV, 1 kV, 1.5 kV, 2 kV, 2.5 kV, 3 kV,4 kV, 5 kV, 6 kV and 8 kV test levels (this page)

Matching Networks:

CN-INS-500: 500 Ω, or 40 Ω direct output from the generator.

CN-INS-X: 40Ω-4kΩ customizable

Other optional modules:

OPT-INS-MEAS: Voltage and Current Test Boards

V-PROBE-30K: Voltage Probe

EXT-INS-CON: test chamber

TC-ST: Safety circuits

TC-ADAPTER: Conversion Circuitry

WARNING-LAMP: Hazard warning lamps

EMERGENCY-STOP: Emergency stop button

TEMA3000: Test Software

INS serial products have replaced several models of MIG serial products, contact us for more information.

Reference: Digital Isolators - High Voltage Enhanced Isolation: Safety Regulations, Standard Definitions and Test Methods