This page mainly lists the catalog of available models of antenna towers/antenna mounts/antenna poles and other related products manufactured by MATURO-GMBH, Germany, please select the desired product to contact EUTTEST for more information.
Height and Pitch Adjustable Antenna Tower/Antenna Pole
Compact Antenna Tower/Antenna Pole CAM Sequence
The CAM sequence is driven by an air compressor, avoiding the EMC problems of electric drives, and can be customized for other heights and load capacities.
“Reminder: swipe tables left and right”CAM6.0-P-12kg
Antenna Tower/Antenna Pole AM Sequence
The AM sequence is electrically driven for test environments that are not sensitive to low-frequency interference, and can be customized for other heights and load capacities
“Reminder: swipe tables left and right”AM4.0-O
AM6.0
Antenna Tower/Antenna Pole TAM/BAM Sequence
TAM/BAN sequences with automatic pitch angle adjustment are available, as well as other heights and load capacities on request.
“Reminder: swipe tables left and right”BAM4.5-P
TAM4.0-P
TAM4.0-P
Large Load Antenna Tower/Antenna Pole DAM Sequence
The dual mast design allows the DAM sequence to carry heavier EMC antennas, with other height and load capacities available on request.
“Reminder: swipe tables left and right”DAM4.0-P
DAM6.0-O
Manual Antenna Tower/Antenna Pole MAS Sequence:
The MAS sequence requires manual adjustment and is suitable for small antennas with little weight and not too much variation in height, other heights and load capacities are available on request.
“Reminder: swipe tables left and right”MAS2.0-10kg
MAS4.0-C
MAS3162
2m Pneumatic Antenna Tower/Antenna Pole PAS/ASP Sequence
The PAS/ASP sequence is a low cost and relatively short antenna tower, if the height of this sequence does not fulfill the requirements, please choose the AM sequence antenna tower. Other heights and load capacities are also available upon request.
“Reminder: swipe tables left and right”PAS2.0-10kg
ASP1.0/1.8-15kg
Motorized Antenna Tower/Antenna Pole EAS Sequence
Other heights and load capacities available on request
“Reminder: swipe tables left and right”EAS1.5/10kg
EAS 1.0/2.0
EAS365-15kg
Special customized MAP sequences
This is a low cost antenna tower with adjustable antenna height and pitch angle, the maximum height is only 2.5 meters, if this height doesn't meet your requirements, please purchase the TAM/BAM sequence, other heights and loading capacities are also available upon request.
“Reminder: swipe tables left and right”Electric Field Generator Locator
This is an adjustable height, antenna polarization and tilt angle antenna tower for heavy duty electric field generator antennas. It only raises the antenna to 1.5 meters.
“Reminder: swipe tables left and right”Pneumatic Antenna Support PAS 2.0-3-N
The PAS sequence supports simultaneous loading of 3 EMC antennas for simultaneous height adjustment.
“Reminder: swipe tables left and right”Cable winch CW 13-2t
The CW 13-2t is able to change the height of loaded objects in a dark room of the electric wave and supports up to 2 tons of cargo.
“Reminder: swipe tables left and right”Antenna adapter:
The antenna adapter needs to be used with the above Maturo brand antenna towers/antenna poles, please select the appropriate adapter model according to the antenna models already in the second column.
“Reminder: swipe tables left and right”pertainSchwarzbeck(used form a nominal expression)EMC Antennas
EMC Antenna for Schaffner-Chase (Teseq)
pertainRohde & SchwarzEMC Antennas
pertainETS-LINDGREN (EMCO) EMC antenna
EMC Antennas for USAR (Amplifier Research)
EMC Antennas for TDK
EMC Antennas for Narda
Antennas for IABG
Antennas for Austrian Research Centres
Antennas for Frankonia
Antennas for Electro Metrics
Controller:
The controller is used to control the automatic operation of antenna towers or other Maturo products.
NCD V2.0
NCD V2.0 is used to operate up to 8 devices with multi-axis motion and supports touch screens, function keys, various interfaces and more!
- Data interfaces: IEEE 488.2 (GPIB) and Ethernet
- Device interface: fiber optic cable (up to 2000 m distance)
- Transfer rate: 100 Mbit/s real time
Control software: Generation 3.0
The Generation 3.0 software can be installed and operated from an ordinary PC and can be combined with combines that communicate with existing GPIB devices, including the Handheld Service Unit HSU 3.0, with the optional Touch Control Unit TCU 3.0.
Fiber Control Unit FCU3.0
The FCU 3.0 is used to operate up to four devices with multi-axis motion and can control four different maturo devices.
- Data interface: TCP/IP
- Device interface: fiber optic cable (up to 2000 m distance)
- Transmission rate: real time (100 Mbit/s)
FCU3.0-S
FCU3.0-S supports device control operations for a Maturo
- Data interface: TCP/IP
- Device interface: fiber optic cable (up to 2000 m distance)
- Transmission rate: real time (100 Mbit/s)
FCU3.0-S-lite
FCU 3.0-S-lite for single-axis machine operation
- Data interface: TCP/IP
- Device interface: fiber optic cable (up to 2000 m distance)
- Transmission rate: real time (100 Mbit/s)
Discontinued controller:
The following maturo controllers have been discontinued, please use the above models instead.
- MCU
- NCU
- SCU
Order No. EUTS0748
Schwarzbeck Product List Schwarzbeck 
ETS-Lindgren Product List ETS-Lindgren 
Schwarzbeck-lisn Product Catalog Schwarzbeck 
Current Probes - TEM - CDN - ISN - LISN FCC 
Coupling Decoupling Network FCC 
Schwarzbeck CDN and CDNE Coupling Decoupling Networks Schwarzbeck 