Current Probe-EMI

Current Probe-EMI is generally used to test the high frequency interference signals on power cables, signal cables and other cables of the electronic products under test.

The EMI Current Measurement Probe can also be used for BCI-substitution testing to monitor theCurrent Injection Probesinterference currents coupled on the DUT interconnecting cables. Also, consider addingsignal source,Power amplifierThe load is a 50 ohm load,RF cableand other test instruments.

Current Probes - EMI Current Measurement Probes

Filter products by test frequency

Note: The current function is still being improved, most products have not yet added the test frequency attribute, and the current function is not fully applicable to all products! If you do not find a product, please use the menu bar - Search for Products or contact us for information.

Current Probe-EMI full product list:

Total number of products available for sale in the current product category: 75; Total number of products on the current page: 8.

F-170329-1005-1 | FCC | 10kHz-30MHz | 1.4Ω Current Monitor Probe

10kHz - 30MHz

F-170329-1005-1 | FCC | 10kHz-30MHz | 1.4Ω Current Monitor Probe

F-170329-1005-1 is a 30MHz current monitoring probe manufactured by FCC and authorized to be sold by EUTTEST in Shenzhen, China. This 1.4Ω current monitoring probe can measure the...

F-170317-1005-1 | FCC | 100kHz-300MHz | 3.5Ω Current Clamp

100kHz - 300MHz

F-170317-1005-1 | FCC | 100kHz-300MHz | 3.5Ω Current Clamp

F-170317-1005-1 is a 3.5Ω current clamp manufactured by FCC, with an inner diameter of 305 mm, which can open and clamp large cable bundles of new energy vehicles, avionics and other component products, mainly...

F-170308-1005-1 | FCC | 10Hz-50MHz | 0.7Ω Conducted Emission Current Probe

10Hz - 50MHz

F-170308-1005-1 | FCC | 10Hz-50MHz | 0.7Ω Conducted Emission Current Probe

F-170308-1005-1 is a 0.7Ω conducted emission current probe manufactured by FCC, this probe is mainly used to measure the conducted emission from 10 Hz to 50 MHz, and it can work in the common 50 Hz...

F-170302-1005-1 | FCC | 10Hz-50MHz | 20A Current Monitoring Probe

10Hz - 50MHz

F-170302-1005-1 | FCC | 10Hz-50MHz | 20A Current Monitoring Probe

F-170302-1005-1 is a 20A current monitoring probe manufactured by FCC and authorized for sale by EUTTEST Shenzhen. This probe is mainly used in EMC labs for testing pulse current, such as...

F-110305-1005-1 | FCC | 10kHz-1GHz | 1Ω Current Monitor Probe

10kHz - 1GHz

F-110305-1005-1 | FCC | 10kHz-1GHz | 1Ω Current Monitor Probe

F-110305-1005-1 is a 1Ω current monitoring probe manufactured by the FCC in the U.S.A. It supports conductive current emission test requirements for cables up to 32mm in diameter, and can be used in EMC labs, hardware R&D and other places to make...

F-2000-40mm-1 | FCC | 10MHz-2.1GHz | 12.5 Ω Current Probe

10MHz - 2.1GHz

F-2000-40mm-1 | FCC | 10MHz-2.1GHz | 12.5 Ω Current Probe

The F-2000-40mm-1 is a 12.5 Ω current probe manufactured by the FCC in the U.S.A. It covers the test frequency range of 10 MHz - 2.1 GHz, and can accommodate product work cables up to 40 mm in diameter,...

F-2000-32mm-2 | FCC | 10MHz-3GHz | 350A Current Monitoring Probe

10MHz - 3GHz

F-2000-32mm-2 | FCC | 10MHz-3GHz | 350A Current Monitoring Probe

The F-2000-32mm-2 is a 350A current monitoring probe manufactured by the FCC. It can be used in EMC labs and field testing of electronic products in installation environments, with a frequency range of 10MHz - 3GHz....

F-2000-32mm-1 | FCC | 10MHz-2.1GHz | 18Ω Current Probe

10MHz - 2.1GHz

F-2000-32mm-1 | FCC | 10MHz-2.1GHz | 18Ω Current Probe

The F-2000-32mm-1 is an 18Ω current probe manufactured by FCC in the USA that can pass 350 amps of current at DC - 400Hz and can also withstand 3 amps of continuous wave current and 1...