Current Probe-EMI

Current Probe-EMI is generally used to test the high frequency interference signals on power cables, signal cables and other cables of the electronic products under test.

The EMI Current Measurement Probe can also be used for BCI-substitution testing to monitor theCurrent Injection Probesinterference currents coupled on the DUT interconnecting cables. Also, consider addingsignal source,Power amplifierThe load is a 50 ohm load,RF cableand other test instruments.

Current Probes - EMI Current Measurement Probes

Filter products by test frequency

Note: The current function is still being improved, most products have not yet added the test frequency attribute, and the current function is not fully applicable to all products! If you do not find a product, please use the menu bar - Search for Products or contact us for information.

Current Probe-EMI full product list:

Total number of products available for sale in the current product category: 75; Total number of products on the current page: 8.

F-220126-1005-1 | FCC | 10kHz-400MHz | CISPR25 Current Probe

10kHz - 400MHz

F-220126-1005-1 | FCC | 10kHz-400MHz | CISPR25 Current Probe

F-220126-1005-1 is an FCC-produced current probe and current clamp product that covers the frequency range of 10 kHz to 400 MHz and complies with the CISPR25 Current Probe Test Requirements....

F-220124-1005-1 | FCC | 10kHz-1GHz | DO-160 Monitor Current Probe

10kHz - 1GHz

F-220124-1005-1 | FCC | 10kHz-1GHz | DO-160 Monitor Current Probe

F-220124-1005-1 is a DO-160 monitoring current probe manufactured by FCC (USA) and authorized by EUTTEST (Shenzhen) for sale in China, the test frequency of this probe can be up to 1...

F-220121-1005-1 | FCC | 10kHz-1GHz | 32mm Current Monitor Probe

10kHz - 1GHz

F-220121-1005-1 | FCC | 10kHz-1GHz | 32mm Current Monitor Probe

F-220121-1005-1 is a current monitoring probe manufactured by the FCC. The probe snaps directly onto the power or signal line of the DUT for radiation testing from 10kHz to 1GHz ...

F-220114-1005-1 | FCC | 10kHz-1GHz | RF Current Probe

10kHz - 1GHz

F-220114-1005-1 | FCC | 10kHz-1GHz | RF Current Probe

The F-220114-1005-1 is a 1 GHz current monitoring probe from FCC that can be used to measure 10 kHz to 1 GHz conducted and transmitted common-mode nuisance currents on electronics power lines....

F-210602-1005-1 | FCC | 10kHz-400MHz | 70mm Current Monitor Probe

10kHz - 400MHz

F-210602-1005-1 | FCC | 10kHz-400MHz | 70mm Current Monitor Probe

F-210602-1005-1 is a current clamp and current monitoring probe manufactured by FCC, Inc. in the United States. RF currents up to 10Hz-400MHz can be read by the probe and tested for common-mode interference on cables....

F-200925-1005-1 | FCC | 10kHz-1GHz | ISO11452-4 Current Monitoring Probes

10kHz - 1GHz

F-200925-1005-1 | FCC | 10kHz-1GHz | ISO11452-4 Current Monitoring Probes

The F-200925-1005-1 is a current monitoring probe that complies with the EMC test standard ISO11452-4, the BCI high current injection method, and can be used to test EUT cables from 10kHz to...

F-200921-1005-2 | FCC | 10kHz-400MHz | Common Mode Nuisance Current Clamps

10kHz - 400MHz

F-200921-1005-2 | FCC | 10kHz-400MHz | Common Mode Nuisance Current Clamps

F-200921-1005-2 is a common-mode nuisance current clamp manufactured by the U.S. FCC and distributed by EUTTEST Shenzhen. This current clamp is also used to test the common mode on the DUT's power or communication cables...

F-200921-1005-1 | FCC | 1kHz-750MHz | 1.77Ω Current Monitor Probe

1kHz - 750MHz

F-200921-1005-1 | FCC | 1kHz-750MHz | 1.77Ω Current Monitor Probe

F-200921-1005-1 is a 1.77 Ω current monitoring probe manufactured by the FCC. It can measure common mode current nuisance signals propagating outward from EUT extended power or signal lines, and the test frequency covers 1kHz-...