Current Probe-EMI

Current Probe-EMI is generally used to test the high frequency interference signals on power cables, signal cables and other cables of the electronic products under test.

The EMI Current Measurement Probe can also be used for BCI-substitution testing to monitor theCurrent Injection Probesinterference currents coupled on the DUT interconnecting cables. Also, consider addingsignal source,Power amplifierThe load is a 50 ohm load,RF cableand other test instruments.

Current Probe-EMI full product list:

Total number of products available for sale in the current product category: 75; Total number of products on the current page: 8.

F-52 FCC Current Probe

The F-52 current probe is one of the products manufactured by FCC and authorized to be sold by EUTTEST in Shenzhen, U.S.A. The available frequency range of the probe is 10kHz - 500MHz....

SW 9606 Schwarzbeck 200MHz Current Sensor

9kHz - 200MHz

SW 9606 is a current sensor with a transmission impedance of 8Ω produced by Schwarzbeck, Germany, which is represented by EUTTEST in Shenzhen and provides after-sales service. The probe can measure up to 9kHz...

SW 9605 Schwarzbeck 80MHz Current Sensor

9kHz - 80MHz

SW 9605 is a current sensor with a transmission impedance of 1Ω produced by Schwarzbeck, Germany, which is distributed by EUTTEST in Shenzhen and provides after-sales service. The probe can measure up to 9kHz...

SW 9603 Schwarzbeck 150MHz Current Sensor

10kHz - 150MHz

SW 9603 is a current sensor with a transmission impedance of 1Ω produced by Schwarzbeck, Germany, which is distributed by EUTTEST in Shenzhen and provides after-sales service. The probe can measure up to 9kHz...

SW 9602 Schwarzbeck 1Ω current sensor

10kHz - 200MHz

SW 9602 is a current sensor with a transmission impedance of 1Ω produced by Schwarzbeck, Germany, which is represented by EUTTEST in Shenzhen and provides after-sales service. The probe can measure up to 9kHz...

CP 9610 Schwarzbeck 1MHz Current Sensor

The CP 9610 is a 1 MHz current transducer from Schwarzbeck, Germany, designed for DC-1 MHz test measurements of low-frequency interfering currents up to 40 A. The CP 9610 is a 1 MHz current transducer from Schwarzbeck, Germany, designed for DC-1 MHz tests. The probe and the DUT are...