F-210315-1008-2 GBT33014.4 50Ω Calibration Fixture

Product Description:

F-210315-1008-2 is a current probe calibration fixture manufactured by FCC in the U.S.A. It is also called 50Ω calibration fixture in our GBT33014.4 standard. This fixture is only used for FCC current injection probe F-210315-1008-1, which can complete 50Ω current calibration and data calibration from 10kHz-500MHz. This product has been authorized to EUTTEST Shenzhen for sales and quotation service in China.

Basic Usage:

BCI test standard number:

GBT33014.4、TSC0501G 、ISO11452-4

Basic Usage:

Check the test levels (currents) specified in the three standards above; then periodically calibrate the entire BCI test system by recording the forward power required to produce the specified current on the 50 Ω calibration fixture F-210315-1008-2 at each test frequency. Unmodulated sine waves shall be used for calibration. If required, the forward power and reflected power shall be recorded in the calibration documentation of the test report. One end of the calibration fixture connected to the 50 Ω load (high power), the other end is connected to the 50 Ω RF power meter, and the series of the corresponding power of the50Ω Attenuatorto protect the power meter.

Product Parameters:

Calibration Fixture F-210315-1008-2 Voltage VSWR Parameter Plot without Current Injection Probe

Note: This product is branded as FCC - Fischer Custom Communications, Inc. and is not Federal Communications Commission (FCC) certified.

Note: Please refer to the original FCC factory data sheet for any changes in product parameters.

FCC Official Authorized Dealer:

EUTTEST is an official FCC authorized dealer, and the full official name of the company is: Fischer Custom Communications, Inc.

Ltd. is authorized by FCC to sell all FCC products in China and provide technical service for the products sold.

Click to view the image of the authorization