NetWave EMTEST Programmable Power Supply Serial Products

Product Description:

EMTEST NetWave programmable power supplies are a family of power supplies manufactured by EMTEST Switzerland, a subsidiary of AMETEK. This family of products offers a wide range of models with outputs of up to 108 kVA and supports DC, single-phase or three-phase power supplies.

Complies with EMC test standards:

This power supply is designed to meet the requirements of IEC/EN 61000-4-13, -4-14 and -4-28 standards. When used as a DC power supply, it meets the requirements of the IEC/EN 61000-4-17 (DC ripple) and IEC/EN 61000-4-29 standards for voltage dips and interruptions in DC power supplies.

With low distortion and high stability, fully compliant measurements for harmonics and flicker tests according to EMC standards such as IEC/EN 61000-3-2, -3-3 are guaranteed even when powering dynamic loads.

In addition, this power supply is ideal for testing inverters (e.g., solar, wind) and electric vehicles, and also provides the capabilities needed for avionics testing.

Conforms to the list of criteria:

• IEC/EN 61000-4-13
• IEC/EN 61000-4-14
• IEC/EN 61000-4-28
• IEC/EN 61000-4-27
• IEC/EN 61000-4-17
• IEC/EN 61000-4-29
• IEC/EN 61000-3-2
• IEC/EN 61000-3-3
• IEC/EN 61000-3-11
• IEC/EN 61000-3-12
• JIS C 61000-3-2

EMTEST NetWave Features:

Programmable:

NETWAVE is a powerful and versatile power supply for AC and DC power supply simulation. This programmable AC and DC power supply has a wide bandwidth and provides powerful waveform generation for a variety of test applications in the EMC field as well as avionics testing. Based on dual-processor technology, it integrates a high-performance PC, a digital signal processor (DSP) and is equipped with a hard disk to generate and record waveforms in real time.

Test as required by the standard:

Its output power has low distortion and high stability, even when powering dynamic loads, ensuring full compliance with harmonics and flicker tests according to IEC/EN 61000-3-2, JIS C 61000-3-2 and IEC/EN 61000-3-3, as well as IEC/EN 61000-3-11 and IEC/EN 61000-3-12 Measurements. It is also ideally suited for testing solar and wind turbines and inverters for electric vehicles. In addition, it can be used to generate immunity test signals according to IEC 61000-4-13, -4-14, -4-27, -4-17 and -4-29 (pre-certified).

Harmonic and flicker measurements require purely sinusoidal voltages according to standard requirements. The output voltage of the netwave power supply is therefore guaranteed to have very low distortion (total harmonic distortion THD below 0.5%) regardless of the load, and waveforms of up to 1GB can be easily recorded, whether the waveforms are programmed in segments or as a single point (which typically generates several MB of data).

Avionics suitability:

Provides complete avionics testing capabilities to DO-160, Airbus ABD0100, Boeing, and MIL-STD-704 and MIL-STD-461.

Power protection function:

Emergency stop, external relay control, interlock, overcurrent, overvoltage, over temperature, undervoltage, current limiter

A list of NetWave's available models:

We offer a wide range of pure sinusoidal power supply models for you to choose from, the basic difference lies in the output voltage, current and power difference, in addition to the output current for DC, single-phase or three-phase power output mode difference, click the first row of the table below to view the detailed technical parameters of each power supply model, and then provide your interest in the product model to the EUTTEST sales staff to get a quote information.

Not enough power?

We also offer higher output power PowerWave Serial 250kW power supply products.

Order No. EUTS0871