NetWave 3 EMTEST 4250W Single Phase AC/DC Power Supply

NetWave 3 can be used for harmonic and flicker testing

Order Number: EUTS0869

Test frequency: DC - 5kHz

Type: Programmable Power Supplies

Brand: EMTEST

Min. order: 1 Unit

Stock: 0

Delivery: 16 weeks

Standards:

Industry： General Electronics

Warranty: Original Import ; New Products ; Authorized Sales

Training: On-site training; Telephone; Email

Logistics: Shenzhen to National

Payment: Internet Banking T/T

Product Price:

Product Description:

NetWave 3 is a single-phase AC/DC power supply with a maximum output power of 4250W produced by EMTEST, an AMETEK company, supporting voltage outputs of up to 310V AC and ±440V DC, as well as special features such as AC source, trigger mode, voltage or frequency fading, and external control.

In addition, this EMTEST NewWave power supply supports the above AC and DC voltage ranges for testing electronic products to some EMC standards. If you want to know more about the features of the netwave, or if you want to choose other single-phase or three-phase power supplies with more output voltages and currents, you can check out the NetWave Sequence Programmable Power Supply Features.

Product Utilization:

can be combined withDPA 500N Sequence integration into single-phase harmonics and flicker test systems

Can be used for harmonic and flicker testing

Ripple Immunity Test System with AMP 200N and CN 200N

Can be used for ripple immunity testing

Technical parameters：

Product Specification Sheet:

NewWave3 offers two power supply models to choose from, the 208 and 230, which differ only in the input power supply; the other output voltage and current parameters are the same.

“Reminder: swipe tables left and right”

Optional product model:

NetWave 3.1-208

NetWave 3.1-230

Manufacturer:

EMTEST

Agent sales in China:

Shenzhen EUTTEST

AC power output:

3 kVA

Maximum output AC voltage:

310V

Maximum output AC current:

Maximum continuous current 10A (at 300V);
Supports higher currents for short periods of time.

DC output power:

4.25 kW

Maximum output DC voltage:

Maximum ±440V

Maximum output DC current:

Maximum continuous current 10A (at 360V);
Supports higher currents for short periods of time.

Bandwidth:

5kHz

Work mode:

AC source: PLL synchronization with other eut test voltage sources
Trigger Channel: Extended Trigger Function
Segmentation step: gradation of voltage and/or frequency within a fixed time window
External Mode: Control NetWave via external control signals
Simple Mode: Optimized control for integrating NetWave into existing automation environments (e.g. Matlab)

Rated Voltage:

208V

230V

Rated current:

35A

32A

Connectors:

wiring terminal

CEE 32A

Size:

19-inch rack 9HU;
417 mm * 449 mm * 500 mm

Weight:

45 kg/99lbs

“Reminder: swipe tables left and right”

Optional accessories:

“Reminder: swipe tables left and right”

Opt-1 NWB

Built-in measurement board with power analysis (1 voltage and 1 current), recommended for aerospace applications (e.g. DO-160, MIL STD 461, etc.)

F-Box

Low-pass filters for DC voltage smoothing for low ripple applications, i.e., MIL-HDBK-704 HDC 103 and LDC 103, available in several models

L-Box

50 µH decoupling coil with integrated 10 µF capacitor for MIL-STD-704 LDC, available in various models

DPA 500N

Digital power analyzer for harmonic and flicker measurements according to IEC 61000-3-2, -12, -3-3, -11 and other standards

AMP 200N2

LF Signal Generator and Amplifier for Ripple and Magnetic Field Generation, DC to 250 kHz (500 kHz), up to 1000 W, Output Voltage up to 160 V peak-to-peak, 50 V rms

CTS

Compliance Test Studio software, offering a wide range of licenses for industrial, aerospace, military and automotive compliance testing

“Reminder: swipe tables left and right”

Order No. EUTS0869