Use the instrument

This catalog is used to summarize the operating instructions and quick operation guides of the equipment prepared by our company, for details, click the title of the article below to view the specific operation methods. After-sales service is not available for instruments not sold by our company.

The following study materials are currently categorized:

Total number of published study materials in current category: 27; Total number of materials in current page: 8.

Oscilloscope Triggering and Signal Storage-Part 3

Oscilloscope triggering and signal storage according to the different types of oscilloscopes have a variety of ways to fully understand the trigger coupling, trigger isolation, record length and waveform storage methods, as well as digital oscilloscopes such as pulse width triggering and short pulse triggering.

Principles and Use of Oscilloscopes-Part II

Oscilloscopes mainly rely on sampling the signal under test to be displayed on the screen, so understanding the sampling technology of oscilloscopes can understand the principles and methods of oscilloscopes. From the sampling process to understand the difference between digital real-time sampling and digital equivalent sampling.

Introduction to Oscilloscopes-Part I

Oscilloscopes Introduction is mainly for zero basic engineers to read, in the following introduction to oscilloscopes, you can understand the use of oscilloscopes, applications, functions, system components, operating principles and types of content to start a full range of zero basic understanding of oscilloscopes this common...

Differences and similarities between current probes F-52B and F-52

The F-52B and F-52 are current probes manufactured by Fischer Custom Communications, Inc. (FCC) under the brand name E...

How to choose the sample rate of an oscilloscope

The analog-to-digital converter of an oscilloscope converts an analog signal into a digital signal. This analog-to-digital conversion rate is called the "sampling rate". The sampling rate of an oscilloscope refers to the number of samples taken per second, usually in MS/s or GS/s. The higher the sampling rate, the better the...

What is the bandwidth of an oscilloscope?

This article focuses on the oscilloscope's "bandwidth" parameters to explain what the oscilloscope bandwidth, but also explains how to select the oscilloscope bandwidth to meet the test requirements to help hardware developers or purchasers to select the oscilloscope bandwidth according to the needs of the use of ...

FCC Current Probe Test Use and Calibration Instructions

This article focuses on test use and calibration instructions for two types of current probes (current injection and current monitoring/measurement). The current probe test use and calibration instructions include CS-conducted immunity test instructions, FCC current probe calibration methods, CE-...

R&S EMI Test Receiver Operator's Guide and Field Q&A Transcripts

EMI receivers for EMC testing can be difficult to operate or understand at a deeper level without software.EUTTEST has compiled the following webinar from an earlier R&S webinar on ESRP receivers, which met...