Resources

This page summarizes and displays all the study materials, references, EMC standard analysis, digital isolator test methods, chip EMC test methods, and other professional resource articles and explanatory documents released by our company.

CS114 Requirements for test methods, test equipment, etc.

CS114 is one of the test items of GJB151B-2013, this article mainly introduces CS114 test methods and test equipment and other requirements, the required test equipment our company have agents to sell, click on the text link below to view the specific ...

CE102 10kHz-10MHz Power Line Conducted Emission Standard Analysis

CE102 is GJB151B-2013 and MIL-STD-461F standards require more than 10kHz power line conduction emission test program, CE102 and CE101 the biggest difference is that the test frequency Fan ...

CE101 25Hz-10kHz Power Line Conducted Emission Standard Analysis

CE101 is a power line conducted emission test item below 10kHz required by both GJB151B-2013 and MIL-STD-461F standards, this article focuses on the CE101 test required by the military EMC standard...

GJB151B-2013 Appendix B-EUT Power Port Conducted Emission Substitution Method

For high-current loads, when the power distribution wiring is short or when there is a specialized return line (relative to the structural return line) laid along the high level line, etc., the 50 μH LISN specified for use in CE101 and CE102 may no longer be suitable, and in this case, it may be...

GJB151B-2013 Performance Requirements for Receivers and Signal Generators

This article describes the military equipment testing EMC should be in accordance with the standard GJB151B-2013 on the receiver and signal generator performance requirements to prepare the standard electromagnetic compatibility test instrumentation. For EMI part of the test, I...

GJB151B-2013 Requirements for DUT EUTs

EUT is in the EMC industry is the English abbreviation for the object to be measured / to be measured, this article focuses on the GJB151B-2013 EUT requirements for the object to be measured in what aspects, including the layout requirements, EUT interconnection cable laying, working condition ...