Resources

This page summarizes and displays all the study materials, references, EMC standard analysis, digital isolator test methods, chip EMC test methods, and other professional resource articles and explanatory documents released by our company.

GJB151B-2013 Performance Requirements for Receivers and Signal Generators

This article describes the military equipment testing EMC should be in accordance with the standard GJB151B-2013 on the receiver and signal generator performance requirements to prepare the standard electromagnetic compatibility test instrumentation. For EMI part of the test, I...

GJB151B-2013 Requirements for DUT EUTs

EUT is in the EMC industry is the English abbreviation for the object to be measured / to be measured, this article focuses on the GJB151B-2013 EUT requirements for the object to be measured in what aspects, including the layout requirements, EUT interconnection cable laying, working condition ...

GJB151B-2013 How to select the correct test arrangement according to the DUT

This page summarizes our military standard GJB151B-2013 How to select the correct test arrangement method according to the EUT. Unless otherwise specified, the EUT of the DUT in all test items of GJB151B-2013 shall be arranged according to...

Introduction to EMC Test Items Required by MIL-STD-461F Standard

This paper describes the EMC test items required by the U.S. military equipment EMC standard MIL-STD-461F, which has been published in various versions including MIL-STD-461 C\D\E\F\G. This...

FCC Current Probe Test Use and Calibration Instructions

This article focuses on test use and calibration instructions for two types of current probes (current injection and current monitoring/measurement). The current probe test use and calibration instructions include CS-conducted immunity test instructions, FCC current probe calibration methods, CE-...

IEC 61967-2 Electromagnetic Emission TEM Cell Test Method for Integrated Circuits 150 kHz-1 GHz Standard Analysis

IEC 61067-2 defines a method for measuring electromagnetic emissions from integrated circuits (ICs). The IC being evaluated is mounted on an IC test printed circuit board (PCB), which is clamped to a circuit board in a transverse electromagnetic (TEM) or broadband gigabit...